Page 26 - Blog

Computer cables (data cables) are somewhat similar to audio and video cables. Instead of transmitting sound or images, they send data for your computer to use. This can be anything from sending over a Word document to streaming movies and TV shows. Technically Ethernet cables fall under this category, but Ethernet is such a broad topic it needed its own independent article. Common types of computer cables include:

• USB
• FireWire
• Serial
• DIN
• PS/2

USB

USB is the most common type of computer cable today, being found on computers, printers, hard drives, cell phones, and more. Along with transmitting data, USB is commonly used to recharge batteries on cell phones and other devices like video game controllers. There are several types of USB cables in various shapes and sizes. The two primary groups are USB 2.0 and USB 3.0.

USB 2.0 is capable of speeds up to 480 Mbps and comes in a few different varieties. When someone just says “USB”, they are generally referring to USB 2.0 Type A. These

Ethernet is one of the most common types of cables, used to connect devices like computers and routers to the Internet. The end of an ethernet cable, an RJ45 connector, looks similar to the end of a phone cable, an RJ12 modem cable, but bigger. While phone cables have four to six wires on the inside, ethernet cables use eight. Ethernet cables come in both solid and stranded variants.

Ethernet Categories

There are a few different variations of ethernet, the foremost being the cable category. This type of cable is abbreviated as “Cat#”, with higher numbers being newer versions of ethernet capable of faster signal speeds. These categories are defined by the Institute of Electrical and Electronic Engineers (IEEE).

Cat5e

Cat5e is an upgraded version of the original Cat5 cable and the current standard version of ethernet. It is capable of data speeds up to 1 Gbps (gigabyte per second) with a bandwidth of 350 MHz (MegaHertz).

Cat6

Cat6 is the next step up and will become the new standard

HDMI: The New Standard

HDMI (High-Definition Multimedia Interface) cables are the new standard for audio/video cables on modern televisions, computers, video game consoles, and more. The majority of new electronics today are built with at least one HDMI port. HDMI is excellent at what does, being able to transmit digital audio and video through a single line.

While HDMI is fantastic, many older devices that predate HDMI are still around and in use. Some newer devices are also built with only alternatives to HDMI, although this is much less common. When either of these scenarios come up, the easiest solution is to use an HDMI adapter. There are different types of adapters (as well as converters) that you may need depending on what you want to convert to HDMI.

HDMI to RCA

Converting HDMI to RCA is one of the more common problems that you can run into, with RCA being the old standard for televisions. Devices such as VCRs, older DVD players, and older video game consoles will only have

ShowMeCables is proud to announce a new addition to our inventory: coaxial cable adapters and connectors from Pasternack. Pasternack is an industry expert specializing in RF and Microwave components with a strong focus on quality above all else.

Pasternack’s items are among the highest quality available, being RoHS and REACH Certified. Each connector is constructed using nickel-plated brass with gold-plated beryllium copper pins and built to withstand temperatures from -85°F to 329°F (-65°C to 165°C). Some units are also available in gold plating, with a temperature rating of -67°F to 311°F (-55°C to 155°C).

A full list of Pasternack parts available at the time of this publication is listed below.

• Pasternack PE4003 - SMA Male Connector Crimp/Crimp Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch
  
• Pasternack PE4009 - SMA Male Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch
• Pasternack PE4016 - BNC Male

What are Lightning Cables?

Lightning cables are a type of cable designed to be used specifically with iPhones. Functionally, they are very similar to the standard types of USB cables used with Android phones. Lightning cables are proprietary to Apple and the only type of connection that will work for charging most iPhones or connecting them to other devices.

Apple introduced Lightning cables in September 2012 to replace older, bulkier connectors. Any iPhone, iPad, or other Apple device made after late 2012 likely uses a lightning connection. Lightning cables are not compatible with older Apple devices that use the wider, 30-pin style connectors.

There are some MacBooks that use a USB-C connection instead of lightning cables. Be sure to check a MacBook to see what it uses before purchasing a cable. Being proprietary, it can be a bit tricky to find lightning cables and accessories without purchasing expensive items from Apple directly. Thankfully, Apple does allow a certain degree of freedom

What are Portable Cords?

A portable cord is a type of power cable designed for temporary use. Portable cords are multi-conductor cables that come in a variety of AWGs. Depending on the specifications of the cord, they can power anything from handheld tools to heavy machinery.

Aside from different AWGs, there are a number of classifications that can be applied to portable cords. Each portable cord has associated letter codes indicating exactly what it is built for. Since portable cords can be used in residential, commercial, and industrial areas, the exact specs of the cord will depend on its application.

Letter Codes

The letter codes used for portable cords are defined by Underwriters Labs:

• S = Severe Service Cord
• SJ = Junior Severe Service
• SVT = Vacuum Cleaner Cord
• T = Tinsel Cord (only if “T” is the first letter)
• T = Thermoplastic (if “T” is not the first letter)
• H = Heat Resistant
• HH = High Heat Resistant
• N = Nylon Outer Jacket
• E = Elastomer
• O = Oil-Resistant Outer Jacket
• OO = Oil-Resistant

There are a few key terms that apply to all cables, one of the main ones being the type of jacket a cable uses. The jacket is the exterior of the cable and can be made from a variety of materials. It is important to ensure that any cable has the appropriate jacket for the location it will be installed.

PVC

PVC (Polyvinyl Chloride), also called CMR (Communications Multipurpose, Riser), cable is the most common cable jacket. This is the type of jacket on a standard cable that you could find off-the-shelf at a store. They are designed with a degree of fire resistance to stop flames from traveling along the cables and spreading through buildings in the event of an emergency. Beyond that, PVC has no special features.

Plenum

Plenum cables adhere to more strict fire codes than PVC. Commonly used inside walls, ceilings, and floors, plenum cables let off non-toxic smoke when they burn. Fire safety codes often require plenum cables for commercial buildings. If you are unsure whether you need plenum

Some types of cables can be either solid or stranded. These terms both refer to the metal core at the center of the cable and are options for ethernet cables as well as some coax cables. Solid cables are made from solid metal while stranded cables are made of many hair-thin strands that are woven together. Each version has a number of advantages and disadvantages over the other.

Solid

Solid cables have a core made from a single metal line, typically copper or copper-clad steel. It is the more common of than stranded, being less costly. The single, thick strand of metal is more resistant to damage such as corrosion and makes the cables easy to manufacture. This also renders them more compact, allowing solid cables to be thinner than their stranded counterparts. Despite being thinner, the solid core makes solid cables less flexible than stranded equivalents. If the cable is bent or moved frequently the wear and tear will eventually cause damage. While solid cables are great for applications

What are Tray Cables?

Tray cables are power cables used in industrial settings such as factories, utility substations, and more. Along with power, tray cables can also be used for communications. Tray cables were first invented to replace smaller cables that had issues with power and communications failure. Today, tray cables are required for many industrial applications in accordance with the National Electric Code (NEC).

As the name implies, tray cables are meant to be used in trays or other conduit like raceway or wiring ducts. The NEC requires that tray cable is supported every six feet. Tray cable must also meet the exposed run requirement for the property it is on.

The most valuable aspect of tray cable is its versatility. They are designed to be used in many rough environments and are built to be waterproof, UV resistant, and resistant to high temperatures. Whether for a light residential project or heavy machinery on a construction site, tray cable is built to get the job done.

What are Variable Frequency Drive (VFD) Cables?

To understand Variable Frequency Drive (VFD) cables, the first step is to look at VFDs themselves. VFDs (also called Adjustable Frequency Drives and Variable Voltage/Variable Frequency Drives) are adjustable speed drives utilized in electro-mechanical systems. A VFD allows users to control voltage and input frequency to adjust torque and AC motor speed.

It is true that VFDs and VFD cables are not the only option for powering industrial equipment. However, they have a number of advantages over their competitors. The precision control enabled by a VFD stops energy from being wasted. The efficiency of using a VFD allows machinery work smarter instead of harder, reducing wear and tear so motors last longer. This also makes the equipment more reliable overall and reduces the amount of maintenance and downtime users will have to deal with.

VFDs can be used in a wide range of applications, from mid-sized machinery to large-scale equipment in industrial