From left to right: FC, LC, SC, and ST

Fiber optic cables utilize a few different fiber connector types that can be used to terminate the cable. While they do bear some similarities, each kind has a different enough size and shape that they are not interchangeable. When preparing any fiber-related equipment for installation, it is important to make sure the cables are equipped with the right connectors for the job.

FC is an older fiber optic connector currently being phased out of industry standards. While single mode cables still use FC, it is unusual to see them on multimode cables. FC connectors take longer to unplug compared to newer fiber optic connectors due to their threaded screw-on design. Additionally, the more complex design and use of metal make them more costly to manufacture. Despite those downsides, FC still sees some use since those threads allow it to remain secure when used on moving machinery.

LC was designed as a push-pull connector that locks in place with a latch. While being faster and easier to operate is an advantage, the main draw of LC is its small size. Being about half the size of other fiber optic connectors, LC can be used on devices that would otherwise have too little room to support a fiber optic connection.

SC is arguably the most common type of fiber optic connector used today. Designed to be simple to use and inexpensive to produce, SC uses a push-pull design similar to LC but utilizes a locking tab instead of a latch to secure the unit. The cost-effective design of SC makes it a popular choice with industries that frequently use fiber cables,

Read more »