Coaxial

ShowMeCables is proud to announce a new addition to our inventory: coax connectors and adapters from Pasternack. Pasternack is an industry expert specializing in RF and Microwave components with a strong focus on quality above all else.

Pasternack’s items are among the highest quality available, being RoHS and REACH Certified. Each connector is constructed using nickel-plated brass with gold-plated beryllium copper pins and built to withstand temperatures from -85°F to 329°F (-65°C to 165°C). Some units are also available in gold plating, with a temperature rating of -67°F to 311°F (-55°C to 155°C).

A full list of Pasternack parts available at the time of this publication is listed below.

• Pasternack PE4003 - SMA Male Connector Crimp/Crimp Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch
  
• Pasternack PE4009 - SMA Male Right Angle Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, .100 inch
• Pasternack PE4016 - BNC Male Connector

This is the 1.5FT RapidRun S-Video + Stereo Audio Flying Lead V.1 This 1.5ft RapidRun S-Video delivers a clean signal and easy cable connections when it comes to in-wall A/V installations. It features a RapidRun 12-pin male connector on one end and S-Video plug on the other. This flying lead is color code green and is intended for use with both RapidRun PC & Multimedia components. Use this flying lead when male s-video and 3.5mm stereo audio connectors are needed to connect to a PC, projector or laptop. Whether hanging a projector in classroom or installing a commercial digital signage system, a clean, crisp signal is delivered every time. The 1.5FT RapidRun S-Video + Stereo Audio Flying Lead V.1 is a quick and easy solution for your audio/video projects. For more information on our products please contact our customer service department at 888-519-9505 For all your cable and connector needs choose show me cables.

Digital Audio Coax Interconnect Patch Cables are a great upgrade from the cables typically included with consumer electronics products. Low-loss 75ohm oxygen-free copper center conductors and foam dielectric provides improved sound quality and performance. The 100% aluminum foil and dual braid shields protect against unwanted noise and interference. Molded connectors with a flexible jacket allow for easy installation and identification. The 24K gold plated connectors ensure long-lasting performance. Features: Length: 3 ft Made from UL 2919 listed cable 24k gold plated connectors High retention connectors for a secure connection Fully molded

Have you recently purchased a new TV, Blu Ray or gaming system? If you have, you may have noticed that many newer media players will have a digital audio output that won’t work with your existing analog audio system. Our digital to analog audio converter will allow you to play audio from your newer equipment with you current receiver. Simply connect either a digital coax or digital optical cable from your media player into the converter. Then you will use a dual RCA cable to connect from the converter to the receiver. And there you have it, digital audio ready to transmit through your analog receiver. Our digital coax and digital optical to RCA converter will provide a quick and easy solution for connecting your new audio equipment to your receiver. For all of your home theater needs, choose Show Me Cables

Are you looking for a quick and easy installation or repair for your coax cable? Our N Male Crimp Connector for RG142B/U is an easy to use, 3-piece design for terminating your cable. The 3 piece connector consists of the connector housing, a ferrule, and the male pin. For this installation you will need: RG142B/U cable, a strip tool, a crimp tool, and the crimp connector. Start inserting the ferrule over the jacket. Then use the strip tool to get rid of the excess jacket and dielectric in one smooth motion. Pull back the braided shield. Crimp the male pin onto the center conductor. Then place the connector onto the cable and pull the ferrule up to the base of the connector, folding the shield with it. Then, use the crimp tool to terminate the ferrule onto the jacket. For all of your cable and connector needs, choose Show Me Cables

Are you looking for a quick and easy installation or repair for your coax cable? Our N Male Crimp Connector for RG8 and RG213 is an easy to use, 3-piece design for terminating your cable. The 3 piece connector consists of the connector housing, a ferrule, and the male pin. For this installation you will need: RG8 or RG13 cable, a strip tool, a crimp tool, and the crimp connector. Start inserting the ferrule over the jacket. Then use the strip tool to get rid of the excess jacket and dielectric in one smooth motion. Pull back the braided shield. Crimp the male pin onto the center conductor. Then place the connector onto the cable and pull the ferrule up to the base of the connector, folding the shield with it. Then, use the crimp tool to terminate the ferrule onto the jacket. For all of your cable and connector needs, choose Show Me Cables

Are you looking for a quick and easy installation or repair for your coax cable? Our N Male Crimp Connector for RG58 and LMR-195 is an easy to use, 3-piece design for terminating your cable. The 3 piece connector consists of the connector housing, a ferrule, and the male pin. For this installation you will need: RG58 or LMR-195 cable, a strip tool, a crimp tool, and the crimp connector. Start inserting the ferrule over the jacket. Then use the strip tool to get rid of the excess jacket and dielectric in one smooth motion. Pull back the braided shield. Crimp the male pin onto the center conductor. Then place the connector onto the cable and pull the ferrule up to the base of the connector, folding the shield with it. Then, use the crimp tool to terminate the ferrule onto the jacket. For all of your cable and connector needs, choose Show Me Cables

Hello and welcome to Show Me Cables. Today we’ll be taking a look at Digital Coax cables. This is the digital audio coax interconnect cable, or more simply, digital coax. Not to be confused with a Digital optical cable. If you would like information about the difference between the two cable types, you can check out our video here: https://youtu.be/hGXrEdLFun8 If you’re looking to upgrade to professional quality audio for your home theater, digital coax cables are just what you need. The cables feature gold plated connectors and high quality shielding to provide superior audio clarity and fidelity. It’s never been easier to enjoy a theater-level audio experience as many newer sound systems, TVs, media players, and gaming devices will have a digital coax port. The connector is an RCA connector like you would find on the standard A/V block of your TV, but it can typically be identified by it’s orange port and will be labeled as an output. If you still have any questions, you can call our customer service department at 888-519-9505. For all of your home theater, choose Show Me Cables.

Hello and welcome to Show Me Cables. Today we’ll be taking a look at Digital Coax cables. This is the professional grade digital S/PDIF RCA cable, or more simply, digital coax. Not to be confused with a Digital optical cable. If you would like information about the difference between the two signal types, you can check out our video here: https://youtu.be/hGXrEdLFun8 If you’re looking to upgrade to professional quality audio for your home theater, digital coax cables are just what you need. The cables feature gold plated connectors and high quality shielding to provide superior audio clarity and fidelity. It’s never been easier to enjoy a theater-level audio experience as many newer sound systems, TVs, media players, and gaming devices will have a digital coax port. The connector is an RCA connector like you would find on a standard A/V block of your TV, but it can typically be identified by it’s orange port and will be labeled as an output. If you still have any questions, you can call our customer service department at 888-519-9505. For all of your home theater needs, choose Show Me Cables.

This is the BNC Female to FME Male adapter. It features a BNC Female connector on one side. And an FME Male connector on the other side. The adapter is made with a nickel-plated, metal construction for maximum signal strength and durability. The adapter will allow you to change a BNC cable into an FME cable. The BNC Female to FME Male adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.