Page 48 - Connector

This is the C14 to C7 Power Adapter. It features a C14 connector on one side. And a C7 connector on the other side. The adapter is rated for 10 amps at 240 volts. The adapter will allow you to change a C13 cable into a C7 cable The C14 to C7 Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

This is the C14 to C15 Power Adapter. It features an IEC C14 connector on one side. And an IEC C15 connector on the other side. The adapter is rated for 15 amps at 250 volts. The adapter will allow you to change a C13 cable into a C15 cable The C14 to C15 Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

Welcome to show me cables. Today we’re going to be taking a look at power connectors. The type of connections we’ll be going over are the IEC and NEMA standard connectors frequently found in data centers, offices, and home usage. Let’s start with the IEC connectors. IEC connectors refer to their connections as either an Outlet or an Inlet compared to the standard Male/Female or Plug/Jack. It also uses a number system, in which the odd numbers are Outlets and the even numbers are Inlets. For instance, the C5 connector is an outlet and the C6 is the same form factor, but is an Inlet. C5 and C6 can commonly be found on laptop power supplies, portable projectors, and some desktop computers. C7 and C8 can commonly be found on battery chargers, power supplies, video game consoles and some A/V equipment. These connectors are available in both a polarized and non-polarized version. The key difference being that the polarized connector will have one side squared off. C13 and C14 can commonly be

This is the C14 to C5 Power Adapter. It features a C14 connector on one side. And a C5 connector on the other side. The adapter is rated for 10 amps at 240 volts. The adapter will allow you to change a C13 cable into a C5 cable The C14 to C5 Power Adapter is a quick and easy solution for your cabling projects. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables.

These are the Gold Plated Metal Spade Plug Connectors in Black and Red. The connectors are made with sturdy, gold plated metal and have black and red bands to make it easy to identify your speaker connections. It can accept speaker wire between 12 and 18 gauge and utilizes a tool-less, screw-crimp installation style. Start by stripping back the cable jacket from your speaker wire. Then strip the individual wires. Unscrew each of the spade plugs and insert the base of the housing over the wire. Then, fan out the conductors around the rim. Make sure the conductors do not overlap with the threads of the connector. Then screw the spade back together. The Gold Plated Metal Spade Plug Connectors will simplify your home theater setup and provide crisp audio fidelity. For more information on our products, please contact our customer service department at 888-519-9505. For all your cable and connector needs, choose Show Me Cables

Belden compression connectors are a premium F type connector used to terminate RG6 cable,

including quad shield, tri-shield and 60% braid shield. They are quad sealed with rubber O-rings to prevent moisture from entering the cable.

To install the SNS1P6, you first need to prepare the cable. If

TNC connectors (Threaded Neill Concelman) are a 50 ohm coaxial connector. It is a higher performing, threaded version of the more common, BNC connector. It is used for RF communications up to 11 GHz. Due to its construction, with threaded coupling which create a secure connection, it is a great choice when working with microwave frequencies. The TNC connector is available in two varieties – standard polarity and reverse polarity (RP-TNC).

History of RP-TNC Connectors

Reverse polarity TNC connectors were popularized by WiFi manufacturers. They were looking for a way to comply with governmental regulations set forth by the FCC to limit consumers from connecting their own antennas. This regulation has largely been abandoned as the connectors are readily available to the general public. They are still a popular connector type used by WiFi equipment manufacturers.

How to Determine a RP-TNC Connector

There are a few steps to determine if you are dealing with a standard or reverse polarity connector.

Apple recently unveiled its newest MacBook Pro, announcing that it would use a single USB Type-C port for power and data transfer. USB Type-C has since been the topic of conversation in the tech world, paving the way for exciting possibilities for improved USB standards and devices.

What is USB Type-C?

Type-C is a new shape of USB connector which is double-sided with 24-pins. It is reversible, a huge improvement to any of us who have once fumbled with plugging a Type-A connector into a port. While Type-C itself is only a change in shape, the excitement lies in the potential for improved standards. The underlying technology of Type-C could be anything from the outdated USB 2.0 to the latest and greatest USB 3.1 and USB Power Delivery (USB PD).

How is USB Type-C Better?

Currently, most devices use USB Type-A, which is bulky and only plugs into a port in one direction. Because Type-A is such a large plug, its ports are equally large. Acceptable for desktop computers, these large ports do not

The SMA connector(SubMiniature version A) is a 50 ohm coaxial connector. It is visually similar to an F type connector that is commonly used for audio/video communication, but has different dimensions, mechanical properties and is used for different applications such as RF communications up to 18 GHz. Due to its construction, SMA connectors provide a strong and durable connection that minimizes reflections, limiting attenuation, and makes it a great choice when working with microwave frequencies.

SMA Male Connector

The SMA male connector is identified by inside 1/4″-36 threads and a 5/16″ hex nut. A standard polarity connector will have a male pin.

SMA Male Dimensions

• Outer Diameter: 6.35mm
• Inner Diameter: 4.59mm
• Pin Diameter: .97mm
• Pin Tip Diameter: .38mm