VHF/UHF/FM Variable Gain Amplifier - 47 to 1000MHz - 25 dB
| Quantity Discount Pricing | ||||
|---|---|---|---|---|
| 1-2 | 3-5 | 6-7 | 8-9 | 10+ |
| $49.79 | $47.39 | $45.39 | $43.19 | $41.19 |
VHF/UHF/FM Variable Gain Amplifier - 47 to 1000MHz - 25 dB
The 25dB VHF/UHF/FM Amplifiers w/ variable gain are used to boost the signal from your antenna to your TV or splitter. This amplifier features a variable gain control to provide up to 25db of gain. Simply install the amplifier to your antenna for up to a 25dB boost. Amplifiers are required when the signal is too weak or for long cable runs over 100 feet. This amplifier supports signals from 47 to 1000 MHz.
Features:
- Bandwidth: 47-1000MHz
- Maximum Input: VHF 40dB MV / UHF 20dB MV
- Gain:
- 54-300Mhz: 25dB
- 300-806Mhz: 22dB
- 900Mhz: 18dB
- Noise Figure: VHF 6dB / UHF 8dB
- Gain Control: 10dB
- Dimensions: 5.5in L x 3.25in W x 1.5in H
- Outer Shell: Iron
Write Your Own Review
Product Questions
what material is the outside shell
Question by: Dewey Johnson on Mar 13, 2019, 4:45 PM
The outer shell of this product is Iron.
Answer by: Blake Woods on Mar 14, 2019, 8:35 AM
I live in Philadelphia, PA. VHF channel 6 in my area is very weak. Will this amplifier boost this frequency enough to be watchable?
Question by: Kenneth Gordon on Mar 31, 2019, 3:34 PM
Yes, this will work. We obviously cant test with your exact set up, but this should work.
Answer by: Jeff - ProductManagement on Apr 1, 2019, 7:15 AM
Q: Where should I install the coax amplifier?
A: Amplifiers should be installed as close as possible to the signal source. For in-line amplifiers outside next to the antenna or satellite dish would be best. Wall powered amplifiers should be installed where the signal line enters the building.
