Times Microwave LMR-600 is designed for flexibility, low loss, RF shielding, and weather ability. LMR-600's cable design enables the tightest bend radius for any cable of similar size and performance. The cable has the lowest loss of any comparable cable. With 90 dB of RF shielding this cable is suitable for applications with a large amount of EMI. LMR-600 can be installed both in and outdoors. Use Times Microwave brand LMR-600 cable for any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable.
Features:
Cable Type: LMR-600
Impedance: 50 ohm
Center Conductor: Bare Copper Covered Aluminum (BCCAI)
Jacket: Polyethylene (PE)
Outer Diameter: .59 inch
Indoor/Outdoor Rated
Attenuation @ 900 MHz/100 ft: 2.5dB/100ft
Attenuation @ 2.4 GHz/100 ft: 4.3dB/100ft
Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable
Max Continuous Length: 1000 FT
LMR® is a Registered Trademark of Times Microwave Systems.
Please note: All products that are bought per foot are non-returnable.
Any amount of cable you order above the maximum continuous length of 1000 FT will be sent in separate pieces.
