Speed up your voice installations with our custom manufactured Telco Patch Panels. They feature a hard to find female Telco connector in the rear and allow plug in play operation. The panel is prewired for your installation. No longer will you have to spend hours punching down and troubleshooting lines, saving you time and installation cost. This patch panel comes with everything needed for installation including rack screws and Velcro Telco strap.
Features:
96 Ports
2 Wire, 50 micron, RJ11 Ports
4 Female Telcos (Amphenol) Rear Connection
Mounting Screws Included
These items are custom manufactured and usually carry a 3 day lead time. Please email or call us at 888-519-9505 for time sensitive orders
A: Patch panels will allow testing routing and maintenance of network/telecom cables connected to your network. With a patch panel this is quickly done just by making changes to cables on the patch panel itself. Patch panels also allow for easier cable management and identification of cable routing.
Q: What is a rack unit?
A: A rack unit U or RU is a unit of measure that describes the height of equipment designed to mount in a rack. A rack unit is 1.75 inches. Typical one rack unit will take three vertical screw holes on each side of a standard rack.
Q: What is the difference between RJ11 RJ12 and RJ45 connectors?
These are all crimp connectors with gold pins used for telecoms networking and occasionally low voltage lighting control applications. The difference is in the number of positions available on the connector and the number of contacts actually present.
RJ45: 8P8C = 8 Position 8 Contact - used in Network Wiring
RJ12: 6P6C = 6 Position 6 Conductor - used in Phone Systems
RJ11: 6P4C = 6 Position 4 or 2 Conductor - used for ADSL telephone and modem cables etc.
The RJ11 and RJ12 are the same size even though they have a different number of contacts. RJ45’s are larger because of the extra positions and conductors.
