14x10x4 Inch Vented INDOOR Enclosure with PoE interface

Secure your wireless equipment...

Remote wireless equipment such as access points, routers and bridges often are more vulnerable to tampering and theft. This can disrupt and even cripple critical communications. A low cost solution for protecting and securing your wireless equipment is the NBP141004-40V. This rugged, composite enclosure is ideal for indoor applications. The compact size of this enclosure makes it ideal for locations with limited space requirements such as equipment closets or mobile applications. Also due to the sleek design and low contrast color, the NBP141004-40V can be used where aesthetics are important, such as in offices and in public areas requiring HotSpots.

The 10.5" x 9.5" x 4" (266 x 241 x 101 mm) compartment features a removable power module with two 48 VDC PoE outlets, one for the incoming cable and one for the outgoing cable to your PoE device. This power module has provisions to install an additional duplex outlet.  Cable access to the inside of the enclosure is achieved via three rubber cable glands located on the bottom. Equipment can be mounted inside the enclosure by using the included hook-and-loop tape. The raised lid features a continuous gasket and a quick release latch with provisions for a padlock. The enclosure material is UV stabilized molded ABS. Three gasketed mounting holes are provided inside the enclosure for easy wall mount installations.

The HGX-PMT17 pole mounting kit (sold separately) is specifically designed for this enclosure and allows you to securely mount the enclosure to any 3-12 inch diameter pole.

Features:

• Compact Weatherproof Molded ABS Enclosure
• Fully gasketed padlockable raised lid, Vented for Indoor Convection Cooling
• 802.3af compatible PoE interface with Cat 5 Surge Protection
• Heavy duty hook-and-loop tape for mounting equipment in enclosure
• NEMA Type 3R, 3RX / IP24 rated