Internet Explorer will soon be unsupported on this site. Please upgrade to a newer browser to continue using our site.

High Density Fiber FDU Patch Panel - Splice Tray and Slide Out Tray - 4U


4 RU | Fits 12 Adapter Panels | Fits Up To 288 Splices | Includes Trays and Spools | Steel Construction | 19' EIA Compliant

Quantity Discount Pricing
1-2 3-5 6-7 8-9 10+
$301.99 $295.99 $285.99 $279.99 $273.99

High Density Fiber FDU Patch Panel - Splice Tray and Slide Out Tray - 4U

This Fiber Distribution Panel is 4U and fits in a standard 19” rack or enclosure. It has 12 adapter panel ports that can fit up to 288 fibers with 12x quad fiber adapter panels. This fiber panel is designed to support both patching and splicing in one distribution panel and includes trays & spools. The distribution panel has a slide out master panel with an integrated tray stop to prevent over-extension of fiber cables. The distribution panel also has a two piece top and a latch door to allow for easy access to the adapter panel.


  • 4 Rack Units
  • Fits Up To 288 Fiber Splices
  • Fits 12 Adapter Panels
  • Includes Twelve 24 Fiber Splice Trays (60mm Sleeves)
  • Made From SPCC Steel
  • Smooth Gliding Slide-Out Panel for Easy Accessability
  • Dimensions: 7" x 19" x 10.75"
    More Information
    Rack Units 2
    Write Your Own Review
    You're reviewing:High Density Fiber FDU Patch Panel - Splice Tray and Slide Out Tray - 4U
    Your Rating

    Product Questions

    No questions yet. Be the first to ask the question!

    What is an adapter panel?

    An adapter panel is a brand-standardized metal sleeve that is used to hold adapters.

    Can I use any fiber patch cable in my network with my enclosure?

    If your fiber enclosure is loaded you must have cables that are compatible with the included adapters.  For unloaded enclosures you must select adapter panels which correspond to your fiber connector type or use a splice tray for single- and mass-fusing.

    What is the difference between simplex and duplex?

    A simplex cable contains a single fiber within a jacket. It can be terminated with one connector at each end.  A duplex cable combines two simplex cables in seperate jacketing with two connectors at each end. It is often referred to as a zipcord.  A simplex adapter and patch cable can only send data in one direction at a time; a duplex adapter and patch cable allows data to be sent and received simultaneously.  Simplex adapters are not compatible with duplex patch cables.

    What is the difference between a port an adapter and a splice?

    The number of ports refers to the number of openings in the panel. A compatible adapter will fit into one port. If the adapter is duplex two connections can be made through one port.  Most adapters are preloaded with a specific style of adapter. A splice is the mechanical bonding of two seperate data lines. With splice trays more data lines can be connected in an enclosure but splicing does not offer the ability to hot swap data lines that adapters allow.

    Should I select a metal or ceramic ferrule?

    The type of internal sleeve required is determined by the type of connector cladding that your cables have. Select adapter panels with the same type of insulation as your cables.

    What are the differences between the fiber connectors?

    ST- Uses a push and turn to lock system

    SC- Has a molded plug casing with push and pull locking system

    LC- Small form factor that resembles an SC connector

    MTRJ- Small form factor with a square plastic casing

    ST SC

    Features & Specs
    Panels The number of panels available? 12
    Rack Units The number of rack units used? 4 RU
    Splice How many splices can be used? 288
    Material What the product is made of? SPCC Steel