Single Port Coax Tap - 5 to 1000 MHz
SKU
Single Port Coax Tap
75 Ohm | Isolation out to tap: 20dB | Single Port | Frequency Range: 5-1000MHz
Single Port Coax Tap - 5 to 1000 MHz - 9dB
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device.
Features:
- 75 Ohm
- Tap Value: 9dB
- Frequency Range: 5-1000MHz
- Tap Loss: 9 ± 1.5dB
- Insertion Loss: 2.2dB
- Isolation out to tap: 20dB
- Return Loss: 15dB
- All Ports F-type Female
Write Your Own Review
| Features & Specs | ||
|---|---|---|
| Number of Taps | Number of tap ports ? | 1 |
| Connector Type | The type of connectors used on this tap? | F-Type Female |
| Frequency Range | Frequencies supported by this tap? | 5 to 1000MHz |
| Tap Value | Attenuation of the tap port ? | 9dB |
| DC Power Passing | Number of Ports that will allow DC power through the tap? | 1 Port |