Satellite Speaker Wall Mount Bracket - 1 Pair

SKU
17-350-002
For Satellite Speakers up to 7.7lbs | Includes Mounting Hardware
Rating:
100% of 100
Quantity Discount Pricing
1-3 4-5 6-7 8-9 10+
$8.02 $7.62 $7.18 $6.74 $6.35

Satellite Speaker Wall Mount Bracket - 1 Pair

These brackets are designed to mount small satellite speakers with a single-bolt mounting system. Each bracket can support a speaker weighing up to about 7.7 lbs (3.5 kg). Each bracket can be adjusted for tilt and swivel, so you can point each speaker to the proper angle for the optimum audio experience.

The brackets can be mounted to wooden stud or brick/concrete/hollow-block walls and includes the hardware necessary for either type of mounting option. Additionally, the kit includes M5x12 screws for mounting the speakers to the brackets. Each speaker mounts about 3' from the wall.

Features:

  • Speaker brackets for satellite speakers
  • Full motion adjustable
  • Material: Plastic
  • Max load: 7.7lbs (3.5kgs)
  • Mounting hardware included

Write Your Own Review
You're reviewing:Satellite Speaker Wall Mount Bracket - 1 Pair
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

RoHS*

Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union. It stands for Restriction of Hazardous Substances Directive.

REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment. It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.

WEEE*

The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community. It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only. It does not guarantee that the product adheres to the following standards. Please check the product description for specific certifications.

Q: What is a VESA mounting pattern?


A: VESA mounting pattern technically called VESA Mounting Interface Standard (MIS) is the industry standard for mounting flat panel monitors and TVs.  It is widely adopted in the industry and allows for easy compatibility between mounts and TVs.


The smallest VESA configuration is 75mm x 75mm.  This means their are four screw holes in a square pattern 75mm apart.


The largest VESA configuration is 800mm x 400mm.  The screws are in a rectangular pattern 800mm apart on the long edge and 400mm on the short edge.


Check your instruction manual for the VESA pattern your TV supports.


Vesa