USB to DB9 Male Serial Adapter Cable - 1.5 FT

SKU
23-152-115
Add DB9 Port to PC | Automatic Handshake | 230kbps+ Data Transfer Rate | Windows Compatible
Rating:
100% of 100
Quantity Discount Pricing
1-9 10-24 25-99 100-249 250+
$23.33 $22.58 $21.53 $20.89 $20.53

Serial Computer Cables - 1.5FT DB9 Male to USB Adapter

The USB to DB9 Serial Adapter from ShowMeCables provides the connection between USB and the traditional RS-232 serial port. The adapter is designed for connections to Cellular phone, PDA, digital cameras, modems, or ISDN terminal adapters through your USB port. Since the adapter uses no IRQs, it is perfect if you need many serial devices attached to your PC.

Features:

  • Connectors: One USB A to DB9 Male
  • Cable length: 1.5 Foot
  • Supports automatic handshake mode
  • Over 230kbps data transfer rate
  • Supports remote wake-up and power management
  • 96 byte buffer each for upstream and downstream data flow
  • Works with cellular phones, PDA, digital cameras, modems, and ISDN terminal
  • Windows 98SE, ME, 2000, XP, Vista and Windows® 7, 8, 8.1, 10
  • Requires Pentium Processor or 200 MHz or above
Write Your Own Review
You're reviewing:USB to DB9 Male Serial Adapter Cable - 1.5 FT
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

RoHS*

Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union.  It stands for Restriction of Hazardous Substances Directive.

REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment.  It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.

WEEE*

The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community.  It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only.  It does not guarantee that the product adheres to the following standards.  Please check the product description for specific certifications.

Q: What is a null modem cable?


A: A null modem cable connects to two standard serial ports for networking two computers together. Null modem cables enable direct data transfer with minimum setup. Null modem cables reverse the transmit and receive lines on each end of the cable to enable direct two-way communication. A null modem cable for PCs ordinarily follows the RS-232 standard and uses the same serial ports as RS-232 cables.


Q: What is the difference between a DB15 and HD15 connector?


A: A DB15 connector has 15 pins arranged in two rows with one row on top of the other. The top row has 8 pins and the lower row has 7. A DB15 connector can be found on sound cards older AUI network cards and devices as well as legacy Macintosh® monitors.


A: An HD15 connector has 15 pins arranged in three rows. Each row has 5 pins with the middle row slightly offset from the top and bottom. A HD15 connector is sometimes called HD DB15 or VGA connector. The HD15 connector is a very common connector used mostly as a video interface for computers and monitors. It can also be found on HD displays and on older HD source devices such as satellite receivers and cable boxes.


What is a Parallel Cable?


A: A parallel cable is used to connect to the parallel ports on a computer and a peripheral device like a printer or external drive. IBM originally developed parallel ports and cables as a mean for connecting a printer to the earliest personal computers.