Fiber Optic Patch Cables

ShowMeCables fiber optic patch cables are available in singlemode and multimode options, including OS1, OS2, OM1, OM2, OM3, OM4, and OM5 fiber types. Offered with LC, SC, ST, FC, MTP/MPO, MTRJ, E2000, and other connector options, in simplex and duplex configurations. Available in black, green, orange, yellow, and aqua, in lengths from 0.5 M to 100 M. Fiber sizes include 9/125, 50/125, 62.5/125, and 10GB 50/125 microns, with APC, UPC, PC, and APC/UPC polish options.

For a complete range of cable solutions beyond fiber optic patch cable specifications, explore our Cables - Cat5e, Cat 6, Cat6a, Cat 7, Cat8, Telephone, Fiber, Audio/Video, Computer, Serial, Power, Wifi & Microwave category, covering additional cable types for network, data, and A/V connectivity applications.

Related Categories:

FAQs

What are fiber optic patch cables used for?

Fiber optic patch cables are used for indoor and outdoor fiber optic communication, networking, data center, and high-speed data transmission applications. They provide options for singlemode and multimode fiber networks, including high-speed 10GB, 40GB, and 100GB applications.

What is the difference between singlemode and multimode fiber optic patch cables?

Singlemode fiber optic patch cables, available in OS1 and OS2 types, use a single light path suited to longer transmission distances, while multimode cables, available in OM1, OM2, OM3, OM4, and OM5 types, use multiple light paths for shorter-reach applications. Selecting between them depends on the distance and equipment requirements of the network.

What connector types are available for fiber optic patch cables?

Fiber optic patch cables are available with LC, SC, ST, FC, MTP/MPO, MTRJ, E2000, and other connector options, in simplex and duplex configurations. Connector combinations include LC to LC, LC to SC, LC to ST, SC to SC, SC to ST, FC to FC, FC to LC, FC to SC, FC to ST, MPO to MPO, MPO to LC, and MPO to SC.

What is the difference between APC, UPC, and PC polish on fiber connectors?

APC (Angled Physical Contact), UPC (Ultra Physical Contact), and PC (Physical Contact) are different polish types available on fiber optic patch cable connectors. Selecting the correct polish type ensures compatibility with the mating equipment port, since these polish types are not designed to interconnect.

What are attenuated fiber optic patch cables used for?

Attenuated fiber optic patch cables are available with 1 dB, 2 dB, 3 dB, 4 dB, 5 dB, 7 dB, 10 dB, 12 dB, 15 dB, and 20 dB attenuation options. These cables are used to intentionally reduce signal strength in applications where optical power needs to be controlled to avoid overloading sensitive receiving equipment.

What jacket materials are available for fiber optic patch cables?

Fiber optic patch cables are available with OFNP (Plenum), OFNR (Riser), PVC, low smoke zero halogen (LSZH), and plastic armored jacket options, in indoor and outdoor configurations. These options allow the cable to be matched to the installation environment and applicable building or fire code requirements.

What form factors are available for fiber optic patch cables?

Form factors for fiber optic patch cables include simplex, duplex, straight-to-straight, fiber loopback, pigtail, MPO conversion, MPO to LC fan-out, MPO to SC fan-out, aggregation conversion, and hybrid fiber/copper cables. Cable types include fiber optic, armored fiber, bend-insensitive fiber, and active optical options.

What lengths are available for fiber optic patch cables?

Fiber optic patch cables are available in lengths ranging from 0.5 M to 100 M, including 1 M, 2 M, 3 M, 4 M, 5 M, 6 M, 7 M, 8 M, 10 M, 12 M, 15 M, 20 M, 25 M, 30 M, 40 M, 50 M, 60 M, 70 M, 80 M, 90 M, and 100 M. This range supports both short equipment-to-panel connections and longer runs across a data center or facility.

Need help selecting the right fiber optic patch cable for your network? Our technical team provides support on singlemode vs multimode selection, connector type and polish compatibility (LC, SC, ST, MTP/MPO, APC/UPC), jacket material for your installation environment, and attenuation requirements for your specific fiber optic application.

Contact Sales: sales@showmecables.com

Product Technical Support: techsupportrf@infiniteelectronics.com

ShowMeCables offers fiber optic patch cables in a variety of configurations to meet your fiber optic networking needs. Whether you require singlemode or multimode cables, simplex or duplex configurations, different connector combinations, jacket options, lengths, or cable constructions, our collection provides choices for a wide range of applications.