Variable Frequency Drive or VFD Cables provide more precise motor control and improved power efficiency for AC motors than traditional DC motor cables.

Due to their robust manufacturing, VFD cables they can reliably carry power from AC drive system to motors, extend motor life, reduce corona discharge, reduce magnitude of standing waves, increase efficiency of power transfer, reliably handle high voltage spikes, and they are sunlight and oil resistant. VFD cables eliminate downtime due to cable failure.

VFD cables are used in a variety of industries including industrial motion control, commercial flow and pumping, and extrusion applications.

ShowMeCables carries a wide variety of VFD Cables in different lengths, sizes, routing, and shielding types.

The VFD cables are capable of working in harsh conditions and environments which include high voltage spikes, high noise, and high interference. With superior shielded VFD cables from ShowMeCables you can effectively prevent interference from frequencies from VFD cables.

Features

VFD (Variable Frequency Drive) Cable
Stranded
Bare Copper
600V
Shielded
(3) 1 AWG Ground Wires
Dual Copper Tape Shields
UV Resistant PVC Jacket
Oil Resistant Jacket
ICEA Method 4 Wiring (Black With Numbers)
RoHS Compliant
UL Listed

Applications

Industrial Motion Control
Commercial Flow/Pumping
Extrusion

Please note: This product is cut to the length and is not returnable.

Any amount of cable ordered above the maximum continuous length of 1000 FT will be sent in seperate pieces.

Reviews

Q&A

Compliance

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

RoHS*

Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union. It stands for Restriction of Hazardous Substances Directive.

REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment. It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.

WEEE*

The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community. It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only. It does not guarantee that the product adheres to the following standards. Please check the product description for specific certifications.

Resources

Cable Type	AWG	Counductor Stranding	Nominal OD	Maximum Pull Tension	Minimum Bend Radius
Belden 29520C	16 AWG	7 x 24	0.39 in	107 lbs	4.0 in
Belden 29521C	14 AWG	7 x 22	0.43 in	162 lbs	4.3 in
Belden 29522C	12 AWG	7 x 20	0.46 in	258 lbs	4.6 in
Belden 29523C	10 AWG	7 x 18	0.51 in	444 lbs	5.1 in
Belden 29524C	8 AWG	7 x 16	0.65 in	576 lbs	6.5 in
Belden 29525C	6 AWG	7 x 14	0.72 in	915 lbs	7.3 in
Belden 29526C	4 AWG	7 x 12	0.83 in	1450 lbs	8.3 in
Belden 29527C	2 AWG	7 x 10	0.99 in	2300 lbs	10.0 in
Belden 29528C	1 AWG	19 x 14	1.13 in	2650 lbs	11.5 in
Belden 29529C	1/0 AWG	19 x 13	1.21 in	3537 lbs	12.3 in
Belden 29530C	2/0 AWG	19 x 12	1.31 in	4200 lbs	13.3 in
Belden 29531C	3/0 AWG	19 x 11	1.42 in	5025 lbs	14.3 in
Belden 29532C	4/0 AWG	19 x 10	1.54 in	6670 lbs	15.5 in

Belden 29532C - 4/0 AWG - 3 Conductor - 600V - Stranded Conductor - Shielded - Variable Frequency Drive (VFD) Cable