Dual Port Coax Tap - 5 to 1000 MHz

Dual Port Coax Tap
75 Ohm | Tap Value: 8dB | Isolation out to tap: 20dB | Dual Port | Frequency Range: 5-1000MHz

Dual Port Coax Tap - 5 to 1000 MHz - 8dB

Coax taps are used when one video source feeds multiple displays in the same location. This dual port coax tap has one feed through port and two tap ports. The feed through port typically will go to the next coax tap in the line. The tap ports will be used for the displays.


  • 75 Ohm
  • Tap Value: 8dB
  • Frequency Range: 5-1000MHz
  • Tap Loss: 8 ± 1.5dB
  • Insertion Loss: 4dB
  • Isolation out to tap: 20dB
  • Return Loss: 18dB
  • All Ports F-type Female
Write Your Own Review
You're reviewing:Dual Port Coax Tap - 5 to 1000 MHz
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov


Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union. It stands for Restriction of Hazardous Substances Directive.

REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment. It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.


The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community. It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only. It does not guarantee that the product adheres to the following standards. Please check the product description for specific certifications.