Single Port Coax Tap - 5 to 1000 MHz
Single Port Coax Tap - 5 to 1000 MHz - 9dB
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device.
Features:
- 75 Ohm
- Tap Value: 9dB
- Frequency Range: 5-1000MHz
- Tap Loss: 9 ± 1.5dB
- Insertion Loss: 2.2dB
- Isolation out to tap: 20dB
- Return Loss: 15dB
- All Ports F-type Female
Proposition 65
WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
RoHS*
Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union. It stands for Restriction of Hazardous Substances Directive.
REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment. It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.
WEEE*
The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community. It stands for Wate Electrical and Electronic Equipment Directive.
* The following information is for information purposes only. It does not guarantee that the product adheres to the following standards. Please check the product description for specific certifications.
| Features & Specs | ||
|---|---|---|
| Number of Taps | Number of tap ports ? | 1 |
| Connector Type | The type of connectors used on this tap? | F-Type Female |
| Frequency Range | Frequencies supported by this tap? | 5 to 1000MHz |
| Tap Value | Attenuation of the tap port ? | 9dB |
| DC Power Passing | Number of Ports that will allow DC power through the tap? | 1 Port |