12 AWG - Multi-Conductor - 600V - Stranded Conductor - Unshielded - VNTC Tray Cable

SKU
12 AWG Unshielded VNTC Tray Cable
Bare Copper | VNTC (600V) | 90°C | UL Listed | Unshielded

VNTC tray cable is a sturdy and adaptable cable suitable for transmitting power, control, relay or other types of signals in wet, dry or hazardous environments.  It is most commonly used for power and control, telemetering, relay control, traffic control, switching, lighting and signal transmission.  It is the preferred cable for factory or commercial applications.

VNTC tray cable can be installed in various types of conduit, ducts, raceways, and cable tray systems.  It is flame retardant, sunlight resistant, burial rated, chemical and oil resistant and can be used in hazardous environments.  It is rated to transmit 600v and has a temperature rating of 167° for wet applications and 194° in dry applications.  It is also great for cold weather installations, being rated for both cold bend and cold impact resistance.

VNTC tray cable is a rugged cable used for wiring your mission-critical equipment, machinery, and systems.

Features

  • VNTC (Vinyl Nylon Tray Cable)
  • Stranded
  • Bare Copper
  • 600V
  • Unshielded
  • UV Resistant PVC Jacket
  • Color Code: ICEA METHOD 1 - TABLE E2 (see Resources Tab)
  • UL Listed

Applications

  • Power and Control
  • Telemetering
  • Relay Control
  • Traffic Control
  • Switching
  • Lighting and Signal Transmission
Write Your Own Review
You're reviewing:12 AWG - Multi-Conductor - 600V - Stranded Conductor - Unshielded - VNTC Tray Cable
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

RoHS*

Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union.  It stands for Restriction of Hazardous Substances Directive.

REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment.  It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.

WEEE*

The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community.  It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only.  It does not guarantee that the product adheres to the following standards.  Please check the product description for specific certifications.

ICEA METHOD 1 - E2 TABLE

CONDUCTOR NUMBER

INSULATION COLOR

STRIPE

CONDUCTOR NUMBER

INSULATION COLOR

STRIPE

1

Black

19

Orange

Blue

2

Red

20

Yellow

Blue

3

Blue

21

Brown

Blue

4

Orange

22

Black

Orange

5

Yellow

23

Red

Orange

6

Brown

24

Blue

Orange

7

Red

Black

25

Yellow

Orange

8

Blue

Black

26

Brown

Orange

9

Orange

Black

27

Black

Yellow

10

Yellow

Black

28

Red

Yellow

11

Brown

Black

29

Blue

Yellow

12

Black

Red

30

Orange

Yellow

13

Blue

Red

31

Brown

Yellow

14

Orange

Red

32

Black

Brown

15

Yellow

Red

33

Red

Brown

16

Brown

Red

34

Blue

Brown

17

Black

Blue

35

Orange

Brown

18

Red

Blue

36

Yellow

Brown

Technical Specs


  • CONDUCTORS: Class B stranded bare copper per UL 83 and 62. 
  • INSULATION: Polyvinyl chloride (PVC) per UL 62 for Type TFFN (18-16 AWG) or UL 83 for Type THWN or THHN wire. Average thickness is 15 mils for sizes 18-12 AWG and 20 mils for 10 AWG. 
  • INSULATION JACKET: Each insulated conductor is jacketed with nylon meeting UL 62 for Type TFFN or UL 83 for Type THWN or THHN wire. Minimum thickness is 4 mils. 
  • COLOR CODE: ICEA Method 1, Table E-2 (formerly K-2). 
  • ASSEMBLY: Conductors are cabled with fillers where necessary to make round. Two conductor cables are flat. 
  • OVERALL JACKET: Sunlight resistant polyvinyl chloride (PVC) per UL 1277.
  • STANDARDS: Tested per UL requirements for Type TC cables having THWN or THHN (TFFN) conductors. Cables are listed for direct burial and meet the IEEE 1202, UL 1277 and ICEA 70,000 BTU Flame Tests. Three conductor and larger constructions meet UL 1277 requirements for Exposed Runs and are rated Type TC- ER (Tray Cable, Exposed Runs) 
  • AMPACITY: Based on not more than three conductors in raceway or cable or earth with an ambient temperature of 30C per NEC 310-16.
  • TEMPERATURE: 90C 
  • VOLTAGE: 600V 


**May be used in Class I, Div. 2 and Class II, Div. 2 Hazardous Locations per NEC Art. 501 and 502. These cables also conform to Art. 392 "Cable Trays" and Art 336 "Power and Control Tray Cable." **