Hammer On Beam Clamp - 1/8 to 1/4 Inch - 1/4-20 Thread | BC18

SKU
93-260-135
Hammer On | 1/4-20 Threading | UL Listed
Quantity Discount Pricing
1-49 50-99 100-199 200-299 300+
$1.49 $1.41 $1.33 $1.25 $1.17

1/8' To 1/4' flange thickness and 1/4-20 thread impression hammer on beam clamps are used to suspend boxes, fixtures and bridle rings to beam flanges. The quick hammer on design eliminates the hardware costs and installation hours associated with traditional beam clamps.

Features:

  • 18'  to 1/4' Flange Thickness
  • 1/4-20 Threading
  • UL Listed
Write Your Own Review
You're reviewing:Hammer On Beam Clamp - 1/8 to 1/4 Inch - 1/4-20 Thread | BC18
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

RoHS*

Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union. It stands for Restriction of Hazardous Substances Directive.

REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment. It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.

WEEE*

The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community. It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only. It does not guarantee that the product adheres to the following standards. Please check the product description for specific certifications.

Q: How much distance should I put between each of my cable supports?


A: You don’t want to put too much weight on any type of cable support. It is a good idea to put a cable support such as a J-Hook or Bridle Ring every 4 to 5 feet. This ensures that your cables will not stretch or fall under too much weight.


Q: What kind of support do I need for data cabling?


A: When you are dealing with sensitive high performance data cables such as fiber optic cables you need to use either J-Hooks or Bridle Rings with saddles. For all other cable types you can use any type of cable support such as standard Bridle Rings.