VGA Video over Cat5e Extender Balun
| Quantity Discount Pricing | ||||
|---|---|---|---|---|
| 1-2 | 3-5 | 6-7 | 8-9 | 10+ |
| $156.86 | $149.39 | $141.93 | $134.45 | $126.99 |
VGA Video over Cat5e Extender Balun
Extend your VGA signal over 300 feet away using one Cat5e or Cat6 cable. This VGA extender comes with two adapters, for a complete setup. One adapter (local) connects the PC, while the other (remote) connects to the monitor. You can use it at distances up to 300 feet with Cat5e or Cat6 cable. These two adapters ensure a crystal clear image. Let ShowMeCables bring you the picture quality you want and deserve, with our fine video products. Use where plenum-rated cable is required to keep cost down.
Features:
- Transmission distance of up to 300 ft./100m
- VGA video signal transmission via Cat5e
- Image quality can be adjusted with ADJ adjustor based on different distances
- High video resolution to 1280x1024 at 60Hz
- Exceptional reference rejection
- Supports PC, Mac, Sun, and Linux systems
- No Power Required
Don't Forget the Cables!
Q: What is a balun?
A: A balun is a small transformer which converts an audio or video signal from unbalanced to balanced and vice versa (hence the term 'bal*un'). By doing so baluns make the necessary impedance adjustment for audio-visual signal transmission between different wiring systems
Q: Why use a Balun?
A: Sending your audio video and data signals over a Cat5e or Cat6 gives you three big advantages. The first one is that it allows you to carry your signal over an extremely long distance overcoming distance limits of some technologies. The second advantage is that it saves you money. Cat5e/6 is affordable especially in plenum rated spaces which is why it’s the cable of choice for media extension. Thirdly Cat5e/6 cable is easier to run in small conduit and tight in-wall installations.
Q: What is the picture quality when using a balun?
A: The picture will be the as good as the source signal. Baluns are designed to maintain signal quality.
Q: Do I need any special tools to install a balun system?
A: No all of our baluns are plug-and-play. Simply connect both baluns to your equipment and run the cable.
