Internet Explorer will soon be unsupported on this site. Please upgrade to a newer browser to continue using our site.

1-lb Solder Spool

18 AWG | 60% Tin | 40% Led | 370 Degree Melting Point | Spool | Creates Round Bead
Quantity Discount Pricing
1-2 3-5 6-7 8-9 10+
$39.99 $37.99 $35.79 $33.79 $31.59

1-lb Solder Spool

This solder is composed of 60% tin and 40% lead which allows it to melt at a lower temperature. It creates a rounded bead of solder. This solder is designed for general electronic use.


  • 1 lbs
  • 18 AWG
  • 60/40 Rosin Core
  • 370'F Melting Point
  • Come on a Spool
Write Your Own Review
You're reviewing:1-lb Solder Spool
Your Rating

Product Questions

No questions yet. Be the first to ask the question!

Q: When selecting a soldering Iron how many watts do I need?

A: Typically soldering irons may have a power rating of between 15 to 30 watts. They are fine for most work. A higher wattage does not mean that the iron runs hotter it simply means that there is more power in reserve for coping with larger joints. Consider a higher wattage iron simply as being more resilient when it comes to heavier-duty work because it won't cool down so quickly.

Q: Is my new soldering iron ready to solder out of the box?

A: No. An important step to good soldering is tinning. Tinning should be done to new irons replacement tips and older iron tips. While the iron is warming up hold the solder against the tip and wait until the solder begins melt. As soon as the solder begins to melt coat the tip surface completely and wipe the tip off with a wet sponge. The end result should be a thin layer of solder coating the tip.