Ubiquiti Networks® UAP-AC-IW UniFi™ In-Wall 802.11ac Dual-Radio Access Point w/ PoE (2.4 GHZ / 5 GHz Throughput)

Ubiquiti Networks® UAP-AC-IW UniFi™ In-Wall 802.11ac Dual-Radio Access Point w/ PoE (2.4 GHZ / 5 GHz Throughput)

The UniFi™ AC In-Wall is designed to convert an Ethernet wall jack into a dual-band 802.11ac Wi-Fi access point with two Gigabit Ethernet ports. With the UAP-AC-IW’s easy setup-monitoring, and control, it’s incredibly simple to achieve scalable, dedicated Wi-Fi in every room of your installation. With this component, an Ethernet wall jack becomes an access point, a gigabit switch, and a PoE power source. You can wire a workstation and power a VoIP phone, or power a managed multi-port gigabit switch for even more Ethernet ports. Easily accessible through any standard web browser, the controller software is ideal for high density client deployments. RF map and performance features, real-time status, automatic UAP device detection, and advanced security options are all seamlessly integrated.

Features: 

• Networking Interface: 3 10/100/1000 Ethernet Port
• Reset Button
• Power Method: 802.3at PoE+ Supported
• Power Supply: UniFi PoE Switch (Not Included)
• Power Save Supported
• PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
• Max. Power Consumption: 7W
• With PoE Passthrough: 19W
• Max. Tx Power:
• 2.4 GHz: 20 dBm
• 5 GHz: 20 dBm
• 1 Dual-Band Single-Polarity Antenna:
• 2.4 GHz: 1 dBi
• 5 Ghz: 20dBm
• Wifi Standards: 802.11 a/b/g/n/ac
• Wireless Security: WEP, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID: Up to 8 Per Radio
• Mounting: 1 Gang Electrical Wall Box (Not Included)
• Operating Temperature: 14°F to 122°F

Advanced Traffic Management:

• VLAN: 802.1Q
• Advanced QoS: Per User Rate Limiting
• Supports Guest Traffic Isolation
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 250+