ShowMeCables PoE Injector, Metal Industrial IP67 Outdoor, Gigabit, 802.3bt 802.3at+, 1-Port, 60W, 55V, Type 3 PSE, End-span or Mid-span
|Quantity Discount Pricing|
The ShowMeCables POEOD1GBT-SM 1-port power over Ethernet injector has a focus on lighting and security that is used in the transportation and telecommunications industries, as well as smart offices outdoor and residential settings. This mountable end-span or mid-span metal industrial outdoor IP67 rated ultra power over Ethernet injector is water resistant and comes with LED indicators, a metal shell and up to Cat6 gigabit speeds. The unit is powered by a standard 2-pin terminal block jumper for power and comes with a grounding wire. The unit can be mounted securely with the supplied screws if desired.
The POEOD1GBT-SM 60W Ethernet injector adds power to POE capable devices, allowing them to be powered by its Ethernet data cable and eliminating the need to run a separate electrical cord or install an outlet near the device. This 1-port 55V ultra power over Ethernet outdoor injector can be used outside with no additional protection or box needed.
The end-span or mid-span ultra-power over Ethernet injector comes with a 60W terminal block connection for power and is suitable for IP phones, cameras, LAN access points, and building devices like touch screens and card readers. This 1-port POEOD1GBT-SM Ethernet injector meets 802.3bt and 802.3at+ standards which can be used for RJ45 network devices that supports power over Ethernet. The unit also supports 6KV DC Ethernet ESD protection when properly grounded with the supplied ground wire.
ShowMeCables has the largest in-stock collection of 55V power over Ethernet for all your critical equipment and power sources. Quickly make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ultra power over Ethernet injector as per your requirement.
- Outdoor IEEE 802.3bt PoE Plus Plus Type 3 Power over Ethernet Injector, 54VDC, 60W max budget (backward compatible with IEEE 802.3at+)
- IP67 rated waterproof, ruggedized aluminum metal case is appropriate for outdoor use and can be mounted with included screws if desired
- Gigabit rated (Cat6) for up to 100m
- Powered by included standard 2-pin terminal block jumper (pin 1: V+ / pin 2: V-)
- Endspan type with +(1,2), -(3,6) pin assignments or Mid-span type with +(4,5), -(7,8)
- Access Points, Bridges, Network Switches, Amplifiers and Amplified Antennas
- IP (Internet Protocol) and Security Cameras
- VoIP (Voice over Internet Protocol) Telephones
- Digital Signage and Building Control Systems
- Traffic Systems