L-com Metal Armored USB Cables - Type A - B Connectors, Revision 2.0 Compliant

This item is subject to a 15% tariff surcharge
USB 2.0 | 20 AWG | Stainless Steel Jacket |1500 PSI Crush Resistance

L-com Metal Armored USB Cables - Type A - B Connectors, Revision 2.0 Compliant

Durability and dependability seperate these L-com Metal Armored USB Cables from the rest. The stainless steel crush resistant jacket provides optimal protection against any hazards this cable might face. With a sleek design, this cable is the perfect solution for any run where foreign substances may be a factor. The crush resistance on this cable is rated at 1500 PSI! This cable contains 20 AWG USB power wires which allow for maximum power transfer. Buy now for same day shipping!


  • USB 2.0
  • Connector 1: USB Type A Male
  • Connector 2: USB Type B Male
  • 20 AWG
  • 1500 PSI Crush Resistance
  • Foil Plus Braided Shield
  • Stainless Steel
More Information
Tariff Percentage 15%
Write Your Own Review
You're reviewing:L-com Metal Armored USB Cables - Type A - B Connectors, Revision 2.0 Compliant
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov


Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union.  It stands for Restriction of Hazardous Substances Directive.

REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment.  It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.


The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community.  It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only.  It does not guarantee that the product adheres to the following standards.  Please check the product description for specific certifications.

Q: What kind of cable do I need for my printer?

A: Typically printers today are connected with a USB A Male to B Male cable

Q: What if I need to extend my current USB cable past the 16 foot distance limit?

A: Because passive USB cables have a distance limitation you would need an active extension cable to help boost the signal coming from the source.

Q: I'm unsure what USB cable I need can you help?

A: Please click on the resource tab to see the USB connector graph. This should help identify the correct cable.

USB Connector Guide

Connector Type


Common Use

USB 2.0 A Male

USB A Male

Commonly plugged into the USB port on a computer

USB 2.0 A Female

USB A Female

Commonly used for extending the length of an existing USB cable. USB A Male is able to plug into this connector

USB 2.0 B Male

USB B Male

Commonly used on a printer external hard drive and other USB Devices
USB 2.0 Micro Male
USB Micro Male

Commonly used on new smartphones and other USB devices

USB 2.0 Mini Male

USB Mini Male

Commonly used on cell phones digital cameras and GPS devices

USB 2.0 Mini Female

USB Mini Female

Commonly used to extend the length of an existing USB mini cable

USB 3.0 A Male

USB 3 A MAle

Commonly used on USB 3.0 devices

USB 3.0 B Male

USB 3 B Male

Commonly used on USB 3.0 printers and other USB devices

USB 3.0 Micro

USB 3 Micro Male
Commonly used on USB 3.0 hubs and other devices