Belden 29527C - 2 AWG - 3 Conductor - 600V - Stranded Conductor - Shielded - Variable Frequency Drive (VFD) Cable

SKU
Belden 29527C Bulk Cable
2 AWG | 3 Conductor | Bare Copper | VFD (600V) | 90°C (194°F) | UL Listed | Shielded

Variable Frequency Drive or VFD Cables provide more precise motor control and improved power efficiency for AC motors than traditional DC motor cables.

Due to their robust manufacturing, VFD cables they can reliably carry power from AC drive system to motors, extend motor life, reduce corona discharge, reduce magnitude of standing waves, increase efficiency of power transfer, reliably handle high voltage spikes, and they are sunlight and oil resistant. VFD cables eliminate downtime due to cable failure.

VFD cables are used in a variety of industries including industrial motion control, commercial flow and pumping, and extrusion applications.

ShowMeCables carries a wide variety of VFD Cables in different lengths, sizes, routing, and shielding types.

The VFD cables are capable of working in harsh conditions and environments which include high voltage spikes, high noise, and high interference. With superior shielded VFD cables from ShowMeCables you can effectively prevent interference from frequencies from VFD cables.

Features

  • VFD (Variable Frequency Drive) Cable
  • Stranded
  • Bare Copper
  • 600V
  • Shielded
  • (3) 2 AWG Ground Wires
  • Dual Copper Tape Shields
  • UV Resistant PVC Jacket
  • Oil Resistant Jacket
  • ICEA Method 4 Wiring (Black With Numbers)
  • RoHS Compliant
  • UL Listed

Applications

  • Industrial Motion Control
  • Commercial Flow/Pumping
  • Extrusion
Please note: This product is cut to the length and is not returnable.
Any amount of cable ordered above the maximum continuous length of 1000 FT will be sent in seperate pieces. 
Write Your Own Review
You're reviewing:Belden 29527C - 2 AWG - 3 Conductor - 600V - Stranded Conductor - Shielded - Variable Frequency Drive (VFD) Cable
Your Rating

Proposition 65

WARNING: This product can expose you to chemicals including phthalates, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

RoHS*

Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment in the European Union.  It stands for Restriction of Hazardous Substances Directive.

REACH*
REACH, a European Union regulation addresses the production and use of chemical substances and their potential impacts on both human health and the environment.  It stands for Registration, Evaluation, Authorisation, and Restriction of chemicals.

WEEE*

The WEEE Directive set collection, recycling and recovery targets for all types of electrical goods in the European community.  It stands for Wate Electrical and Electronic Equipment Directive.

* The following information is for information purposes only.  It does not guarantee that the product adheres to the following standards.  Please check the product description for specific certifications.

Cable TypeAWGCounductor StrandingNominal ODMaximum Pull TensionMinimum Bend Radius
Belden 29520C 16 AWG 7 x 24 0.39 in 107 lbs 4.0 in
Belden 29521C 14 AWG 7 x 22 0.43 in 162 lbs 4.3 in
Belden 29522C 12 AWG 7 x 20 0.46 in 258 lbs 4.6 in
Belden 29523C 10 AWG 7 x 18 0.51 in 444 lbs 5.1 in
Belden 29524C 8 AWG 7 x 16 0.65 in 576 lbs 6.5 in
Belden 29525C 6 AWG 7 x 14 0.72 in 915 lbs 7.3 in
Belden 29526C 4 AWG 7 x 12 0.83 in 1450 lbs 8.3 in
Belden 29527C 2 AWG 7 x 10 0.99 in 2300 lbs 10.0 in
Belden 29528C 1 AWG 19 x 14 1.13 in 2650 lbs 11.5 in
Belden 29529C 1/0 AWG 19 x 13 1.21 in 3537 lbs 12.3 in
Belden 29530C 2/0 AWG 19 x 12 1.31 in 4200 lbs 13.3 in
Belden 29531C 3/0 AWG 19 x 11 1.42 in 5025 lbs 14.3 in
Belden 29532C 4/0 AWG 19 x 10 1.54 in 6670 lbs 15.5 in