With Gigabit Ethernet, Broadband audio/video and security capabilities, Cat6 350Mhz Bulk Cable is ideal for your critical network installation.  With its low smoke FEP jacket, the 350Mhz cable can be installed in air plenums and ducts in accordance with NEC Article 800. This cable is UL listed and is compliant to EIA/TIA Category 6 draft and tested through 350MHz.

Features:

• 4-pair unshielded twisted pair cable
• Varying left hand lays to minimize crosstalk
• 24AWG solid bare copper conductor for superior conductivity
• EIA/TIA Category 6 compliant
• Tested to 350Mhz to provide additional performance and bandwidth over and above the basic requirements of Cat6 350Mhz standards
• Durable, low smoke, FEP plenum rated jacket
• Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed Category 6 requirements for high-speed, full duplex, parallel transmission protocols
• CMP classified for use in air handling ducts and plenums in accordance with article 800 of the National Electrical Code
• Compliant to EIA/TIA Category 6 and tested through 350MHz

With Gigabit Ethernet, Broadband audio/video and security capabilities, Cat6 350Mhz Bulk Cable is ideal for your critical network installation.  With its low smoke FEP jacket, the 350Mhz cable can be installed in air plenums and ducts in accordance with NEC Article 800. This cable is UL listed and is compliant to EIA/TIA Category 6 draft and tested through 350MHz.

Features:

• 4-pair unshielded twisted pair cable
• Varying left hand lays to minimize crosstalk
• 24AWG solid bare copper conductor for superior conductivity
• EIA/TIA Category 6 compliant
• Tested to 350Mhz to provide additional performance and bandwidth over and above the basic requirements of Cat6 350Mhz standards
• Durable, low smoke, FEP plenum rated jacket
• Ideal for 10Base-T(IEEE 802.3), 100Base-TX(IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN(IEEE 802.12), Token Ring(IEEE 802.5), TP-PMD(ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed Category 6 requirements for high-speed, full duplex, parallel transmission protocols
• CMP classified for use in air handling ducts and plenums in accordance with article 800 of the National Electrical Code
• Compliant to EIA/TIA Category 6 and tested through 350MHz
• UL/CSA listed