CHO1020 IR Distribution Hub with 4 Emitter Outputs. Regardless of where a device is located, simply aim an infrared remote control at the IR receiver (target) and press the button. The IR codes are transmitted through one Cat5e cable and instantly repeated by each IR emitter connected to the system. All the IR systems components are connected to the central module and are powered via Cat5e cable.

Features:

• 4 IR-emitter output jacks
• Removeable connector for system connection
• One power input jack
• One status input jack
• Includes (1) Power Supply
• Dimensions: 2in x 2.5in

CHO1021 Plasma-proof IR Target acts as a remote receiver and control unit. This device is shielded and will not be affected by signal radiation from a plasma TV. May be connected to other IR targets in parallel. Includes an adhesive backing and 6ft cable. Compatible with most standard remote controls.

Features:

• Control range: 80ft indoors, 15-20ft in direct sunlight
• Frequency: 47KHz
• Dimensions: .43in W x .39in D x 1.81in H
• Includes 6ft cable
• Adhesive backing
• Unit may be connected to other IR targets in parallel

CHO1022 IR target is ideal for mounting in cupboards, cabinets, panels or racks, to control A/V devices behind closed doors. Features slim, unobtrusive styling. Compatible with most standard remote controls. This unit may be connected in parallel to up to 3 other IR targets when connected to the Model RPT-104 distribution hub.

Features:

• Dimensions: 1/2in Diameter x 2in Depth
• 6ft wire
• IR frequency bandwidth: 38K ± 2K Hz
• Control range: 80ft indoors, 15-20ft in direct sunlight
• Reception Angle: + or - 45 off axis
• Power requirement: DC 12V, 500mA
• LED inddicator for IR response

CHO1023 Wall-plate type IR target. This IR receiver snaps into a Keystone-style wall plate and receives IR signals from a handheld remote control. The transmission media is Cat5/Cat5e cable. Point the handheld remote at the IR target so that the target has a straight view to receive the signal. The distance between the IR receiver and the remote control should not exceed 5 meters. Shown here in ivory, also available in white.

• Frequency: 47KHz
• Snap-in design for Keystone-style wall plate
• Color: Ivory or White

Features:

• Frequency: 47KHz
• Single-head Emitter
• Round, compact size
• 10 feet cable length with 3.5mm mono standard plug
• Self-adhesive tape for quick and easy fixing on any hard, clean & dry surface.

Features:

• Frequency: 47KHz
• Dual-head Emitter
• Round, compact size
• 10 feet cable length with 3.5mm mono standard plug
• Self-adhesive tape for quick and easy fixing on any hard, clean & dry surface.

CHO1028I IR Jack snap-in module with 3.5mm MONO socket.

Features:

• Frequency: 47KHz
• 3.5mm MONO socket
• Color: Ivory or White

CHO1029 IR Jack snap-in module with 3.5mm STEREO socket.

Features:

• Frequency: 47KHz
• 3.5mm STEREO socket
• Color: Ivory or White

The CHO1030 IR target is an Infrared Remote In-Wall Interface designed to be connected to the input terminals of the CHO1020 IR Distribution Hub. Simply connect the CHO1030 to the input terminals of the Distribution Hub. Mount in a single-gang junction box or low-voltage box. This unit may be connected in parallel to up to 3 other IR targets when connected to the distribution hub.

Features:

• Infrared frequency bandwidth: 38K + 2K Hz
• Control range: 80 feet indoors, 15 to 20 feet in direct sunlight
• Reception angle: + or - 45 degree off axis
• Power requirement: DC 12V, 500mA (provided by CHO1020)
• Decora-style Wall plate
• LED indicator for IR response
• Compatible with most standard remote controls
• Available in Ivory or White