Cat6 Shielded Stranded PVC Cable - Red - 1000 FT

Part no. 85-600-325 RD:1000

CM rated cable. Gigabit Certified. Often used for patch cables in areas with EMI/RFI interference.

Quantity Discount Pricing
1 2 - 4 5 - 9 10 - 14 15+
$215.00 $210.00 $205.00 $200.00 $195.00
QTY Each Total
X $215.00


Stranded Shielded Cat6 Ethernet cable is best suited for making custom-length cables in environments with electromagnetic or radio frequency interference (EMI/RFI). More flexible than solid conductor cable, stranded Cat6 is what most commonly used Ethernet patch cables are made from. This bulk cable is in an easy-pull box and can be measured and cut to exact distances, then terminated to an RJ45 connector. Cat6 is certified for gigabit Ethernet.

Features:

  • PVC Jacket
  • Overall Foil Shield
  • 24 AWG Stranded Bare Copper Conductors
  • Tested up to 550 MHz
  • Meets Cat6 Standards
  • RoHS Complaint
  • ETL Listed
  • CM Rated

REVIEW SUMMARY for Cat6 Shielded Stranded PVC Cable - Red - 1000 FT
No reviews for this product

Q: What is the maximum length for a Cat6 cable?

A: The maximum length for a Cat6 cable run is 100 meters (328 feet). If longer runs are required, the use of active hardware such as a repeater or switch is necessary.

Q: What is the difference between solid and stranded cable?

A: Solid Cat6 is a 4-pair cable. Within each of the 8 individual wires there is a solid piece of wire covered by a PVC jacket. Because of the solid core of these cables they will be more rigid than stranded cable, but can carry a stronger signal than stranded wire. Solid cable also has the ability to be punched down in to jacks, patch panels, and 66 blocks.

Stranded Cat6 is a 4-pair cable as well. Within each of the 8 individual wires there are multiple tiny stands of smaller gauge wire that are held together by a PVC jacket. Because this cable is made with smaller strands of cable it is more flexible than solid core wire. Stranded Cat6 is typically use for short patch cables. Stranded wire cannot be punched down.

Q: What is shielded Cat6 cable?

A: Shielded Cat6 cable is used for increased protection from interference and crosstalk. It is typically used in electrical noisy environments. Common sources of interference are radio towers, high-powered electrical conduit, fluorescent lighting, or any other device emitting electro-magnetic or radio frequency signals.

Q: What’s the difference between the UL and ETL listed Marks?

A: Both marks demonstrate that the product that bears it has met the minimum requirements of widely accepted product safety standards as determined through the independent testing of a Nationally Recognized Testing Laboratory (NRTL). The only real difference between the Marks is in the service, and services, of the testing laboratory behind them.

Both the ETL and UL Listed Marks are recognized by local inspectors and Authorities Having Jurisdiction (AHJs) throughout North America and also in some areas of South America.

Q: What is a flooded cable?

A: Flooded Cat6 cable uses a water blocking gel to protect the cable from water infiltration, even if the cable has a minor cut in the outer jacket. Flooded cable is typically used for direct burial outdoor applications.

Q: Will our Cat6 cable support Power over Ethernet (POE)?

A: Yes, all of our Cat6 will support Power over Ethernet.

Q: What does plenum rated mean?

A: Plenum (CMP) is a rating that is given to cables that have passed a stringent burn test and are able to be run through plenum air spaces. Plenum air spaces include drop ceilings and non-ducted HVAC air returns.

cat colors

crossed connection


Credit Cards