Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB
Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB Thumbnail 1 Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB Thumbnail 2 Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB Thumbnail 3 Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB Thumbnail 4

Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB

Part no. 454

Bandwidth 900 to 2400MHz | Max Gain 20B | Line Powered | Power Passing | Outdoor Rated

Quantity Discount Pricing
1-2 3-5 6-7 8-9 10+
$9.99 $8.99 $8.54 $8.09 $7.64
Quantity Discount Pricing
1 - 2 3 - 5 6 - 7 8 - 9 10+
$9.99 $8.99 $8.54 $8.09 $7.64
QTY  


Satellite In-Line Amplifier - 900 to 400MHz - 20 dB

The 20dB Satellite In-Line Amplifier are used to boost the signal from your satellite to your receiver or multiswitch. Simply install the amplifier at the satellite dish or signal source for an instant 20dB boost. In-line amplifiers are required when the signal is too weak or for long cable runs over 100 feet. This amplifier supports signals from 900 to 2400 MHz.

Features:

  • 20dB +/- 1dB Gain
  • Line Powered
  • Power Passing
  • Low Noise Figure: 4dB Max
  • Outdoor Rated
  • Bandwidth 900 to 2400 MHz
  • Power Consumption: 22VDC 40mA
Features & Specs
Connector A The type of connector on side A? F-Type Female
Connector B The type of connector on side B ? F-Type Female
Signal Gain Signal gain provided by this amplifier? 20 dB
Frequency Range Frequencies supported by this amplifier? 900 to 2400 MHz
Power Source How this amplifier is powered? Line Powered
REVIEW SUMMARY for Satellite In-Line Amplifier - 900 to 2400MHz - 20 dB
No reviews for this product
1

Q: Where should I install the coax amplifier?

A: Amplifiers should be installed as close as possible to the signal source. For in-line amplifiers outside next to the antenna or satellite dish would be best. Wall powered amplifiers should be installed where the signal line enters the building.


Credit Cards