Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT
Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT Thumbnail 1 Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT Thumbnail 2 Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT Thumbnail 3 Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT Thumbnail 4

Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT

Part no. 27-132-006

Balanced | Shielded | Chuck Strain Relief | 22 AWG | Standard XLR Audio Cable

 
(3 reviews)
Quantity Discount Pricing
1-9 10-24 25-99 100-249 250+
$13.11 $12.49 $11.87 $11.24 $10.62
Quantity Discount Pricing
1 - 9 10 - 24 25 - 99 100 - 249 250+
$13.11 $12.49 $11.87 $11.24 $10.62
QTY  


Pro Audio Cable - 6FT XLR 3 Pin Male to Female Cable

XLR cables are typically used for analog signals, primarily audio. These cables are commonly used on microphones, amplifiers, instruments, speakers, and much more. This cable features a balanced nickel plated 3 pin XLR jack and 3 pin XLR plug. The ultra-flexible 7mm PVC jacked reduces cable kinking and helps prevent damage to the connectors. Internally this cable is made from 22 AWG twisted pair cable wrapped in an aluminum foil shield and 60% copper braid for maximum shielding from EMI/RFI interference. Pro-audio cables are perfect for novice and professional musicians.

Features:

  • Length: 6 FT
  • Connector A: 3 Pin XLR Male
  • Connector B: 3 Pin XLR Female
  • Balanced
  • 22AWG Twisted Pair construction
  • Foil shield and 60% copper braid
  • Nickel plated brass connectors
  • Chuck strain relief
  • 7mm PVC jacket
  • Connects balanced line outputs to balanced line inputs
Features & Specs
Connector Side A Connectors on this cable?? 3 Pin XLR Male
Connector Side B Connectors on this cable? 3 Pin XLR Female
Length The Length of the cable? 6ft
Signal Type Type of signal this cable can carryh? Balanced
Use The use for this cable?? Audio
Color The color of the cable? Black
Shielding The type of shielding?? Fully shielded
REVIEW SUMMARY for Pro-Audio XLR 3 Pin Male to XLR 3 Pin Female Cable - 6 FT
 
5.0 (based on 3 reviews)
  • XLR 3 Pin

    Reviewed by:

    From: Conshohocken, PA

    8/8/2016    #23231

    PROS: The product works really well; Faster than I expected
    CONS: None specified
    Exactly what I was looking for.
  • Exactly what the Doc ordered

    Reviewed by:

    From: Lewisville NC

    3/10/2015    #15564

    PROS: The product works really well; Super fast
    CONS: None specified
    Showmecables is always my first stop for cables, connectors, and hard to find audio/video items. Great selection, prices, service seems to be the norm with these guys. Mike Greene, CVR-M
  • Easy shopping experience

    Reviewed by:

    From:

    5/30/2014    #10017

    PROS: None specified
    CONS: None specified
    No surprises, no extra work. Best prices.
  • Perfect Fit… !!

    Reviewed by:

    From: Palm Springs, California

    1/28/2014    #10010

    PROS: Overall Quality
    CONS: None specified
    The cable quality is excellent and both male and female XLRs are very well made. I am happy with this purchase and the length of each cable is perfect for my sound board and wireless mic housing units.
  • Nice & Short!

    Reviewed by:

    From: Chesterfield

    11/26/2012    #10004

    PROS: None specified
    CONS: None specified
    Nice short cable to use with my audio rack. Good strain relief, high quality cable
1

Q: What are XLR Cables commonly used for?

A: XLR Connectors are commonly used for professional audio, video and stage lighting equipment.

Q: What makes an XLR audio cable and DMX cable different?

A: The XLR audio cable is designed for audio frequencies (low frequencies) and is a low impedance (75 Ohm), high capacitance cable. DMX data cable is designed for a wide bandwidth high frequency data stream, it is a higher impedance (110 Ohm) and low capacitance cable. In the DMX system, this impedance mismatch can result in intermittent problems due to a distortion of the waveform of the DMX bit stream. You may have flickering LEDs, scroller miscue, or a twitching moving light. Also some XLR audio cables tie the signal return and shield drain wire differently than we tie the twisted pair return within a DMX cable. This may introduce a potential grounding problem in your system.

Q: What is a balanced cable and what makes them different then an unbalanced cable?

A: Balanced refers to a “three-legged” type of electrical signal that has two legs independent of ground. One is generally considered positive and the other negative in voltage and current flow with respect to ground. Both legs carry the signal. The benefit is that any noise that gets induced into the line will be common to both the positive and negative sides and is thus canceled when it arrives at its destination, assuming the destination is balanced. Balanced lines are generally best for long cable runs due to their ability to reject induced noises. XLR and TRS type cables are designed to transmit balanced audio from one balanced device to another.

Unbalanced cables are less complicated and less expensive but they have limitations. Any audio signal requires two wires or conductors to function. In an unbalanced cable situation, one of those conductors is used to carry both the audio signal and ground (shield). Unbalanced cables are much more susceptible to induced noise problems than their balanced counterparts because any induced noise in one conductor is not canceled by similar noise in the other conductor and may be carried with the signal into connected equipment. In general, unbalanced lines should be kept as short as possible to minimize potential noise problems.


Credit Cards