Mini 3 Pin DIN Male Solder Connector - Plastic

Part no. 1703

3 Pins | Solder Cups | Plastic | Molded Strain Relief | 24 AWG Wire | 5mm Cable

(2 reviews)
Quantity Discount Pricing
1-4 5-9 10-49 50-99 100+
$2.49 $2.19 $2.00 $1.84 $1.70
Quantity Discount Pricing
1 - 4 5 - 9 10 - 49 50 - 99 100+
$2.49 $2.19 $2.00 $1.84 $1.70

The Mini 3 Pin DIN Male Solder Connector is economic and lightweight. The plug comes in four parts and can be easily disassembled for access to the solder cups. The Mini 3 Pin DIN Male Connector accepts up to 24 AWG wire. The Mini 3 Pin DIN Male Connector is designed with molded strain relief and accepts cables up to 5mm.


  • 3 Pin Mini DIN Male
  • Plastic
  • Lead Type: Solder Cups
  • Molded Strain Relief
  • Accepts 24 AWG Wire
  • Accepts Cable up to 5mm
REVIEW SUMMARY for Mini 3 Pin DIN Male Solder Connector - Plastic
2.5 (based on 2 reviews)
  • Mini 3-pin DIN

    Reviewed by:

    From: Tampa Bay, FL

    6/17/2014    #2515

    PROS: good design for this type connector
    CONS: difficult to solder cleanly
    this connector application normally uses stranded wire.......solder contact seems to require external connection. Not solder filled and too small/shallow/close for secure attachment
  • Poor mechanical design

    Reviewed by:

    From: Minneapolis, MN

    3/6/2013    #1027

    PROS: None specified
    CONS: None specified
    Connector was used to replace power connector of audio mixer power supply. Mating connector of mixer is recessed and outer connector shell slides forward on insertion preventing it from seating into mixer connector unless pulled back and inner shell is squeezed while inserting. Pin material is of poor quality so if pins are bent, straightening them will cause them to break. In addition, their l
  • Good quality for the price

    Reviewed by:

    From: Decatur, GA

    1/16/2013    #837

    PROS: None specified
    CONS: None specified
    Seemed a bit flimsy in separate parts, but solid when assembled. Tough to attach ground (4th) wire.

Q: How are Mini DIN Connectors labeled?

A: Mini DIN Connectors are numbered from left to right bottom row to top row. The lower left will always be Pin 1 and the upper right will always be the highest pin number.

Q: What are Mini DIN Connectors used for?

A: Mini DIN Connectors are most commonly used for electronic devices such as computers, peripherals, and video equipment.

Q: What cables are used with DIN Connectors?

A: Din connectors are commonly used with multi-conductor cables with at least one conductor per pin on the connector.

Q: How do I attach a DIN connector to my cable?

A: In order to attach a DIN connector to a cable you must solder each pin to its respective conductor.

Q: How do I prevent melting the plastic in the connector during soldering?

A: When soldering a DIN connector avoid heating the untinned wire and connector point and applying the solder all at once. This will cause melting and frustration. Tinning the wire ends and allowing them to cool before you tin the connector will prevent melting and allow you to attatch the wire correctly.

Pin Configuration Diagram

Credit Cards