IR over HDMI Control Kit - Single Band

Part no. 47-600-015

Complete IR over HDMI Kit | Plug and Play | Easy to Install | Extend Signal Up to 325 FT

(4 reviews)
Quantity Discount Pricing
1-2 3-5 6-7 8-9 10+
$29.99 $28.49 $27.09 $25.69 $24.29
Quantity Discount Pricing
1 - 2 3 - 5 6 - 7 8 - 9 10+
$29.99 $28.49 $27.09 $25.69 $24.29

Infrared Remote over HDMI Control Kit - Single Band

This IR over HDMI control kit allows the user to control audio/video devices that are not in direct line of sight of the remote control. It does this by using the HDMI cable's CEC channel to transmit the IR signal. You can switch between CEC or IR mode. To connect the IR control kit, place both ends of the HDMI cable with the supplied HDMI IR adapters. Connect the IR TX pigtail to the HDMI IR adapter at the source end (Blu-ray player, etc.) and then the IR RX pigtail to the HDMI IR adapter at the display end (HDTV). The IR control kit allows extensions up to 300 feet and can also be used on HDMI switches, splitters, or HDMI extenders.


  • Allows IR control over any HDMI cable
  • Control your source device, such as a Blu-ray player even when it's in a closed cabinet or room
  • Can be used on HDMI cables, HDMI switches, HDMI splitters, and HDMI extenders
  • Distances up to 300 ft.
  • No power needed
  • IR or CEC configurable
  • IR kit includes: one IR Emitter, one IR Target, two HDMI IR adapters
  • Does not support dual band remotes

REVIEW SUMMARY for IR over HDMI Control Kit - Single Band
5.0 (based on 4 reviews)
  • IR Cable/ Splitter

    Reviewed by:

    From: GEORGIA

    11/4/2016    #24553

    PROS: Super fast
    CONS: I couldn’t get it to work
    I was very pleased with my 2-way Splitter. Unfortunately the IR Cable was not compatibly. I had very good help: Andrew Johnston and James Latimore. Thank you for being patient with me. Thanks Sarah Youngblood.
  • cables purchased in order to obtain cable signal.

    Reviewed by:

    From: New Hope, Pa.

    12/24/2014    #13704

    PROS: The product works really well; Super fast
    CONS: None specified
    The Control kit was used to get a TV signal when the cable box was in a closet. This control kit worked perfectly and was easy to install. Quick delivery and I consider this company to be a very reliable vendor. Frank Van Buren
  • HDMI Infrared Remote Kit

    Reviewed by:

    From: Houston, Texas

    10/14/2014    #11718

    PROS: The product works great; Lightning quick
    CONS: None specified
    Having two HD TV's with a separation of over 50 feet, it was hard to change the channels without walking the length of the cable to do it with the remote. But with this kit, I was able to connect it within a few seconds, and solve the mystery. The kits works awesome, and now I don't have to leave the comfort to change the channels on the remote TV. Simple Plug and play.
  • Works great

    Reviewed by:

    From: California

    6/18/2014    #2518

    PROS: Easy to setup, works great
    CONS: Two sided taped supplied doesn't work

Q: What are the different parts of an IR System?

Infrared Target

This device picks up the infrared signal from your remote control just like a TV or VCR. It encodes the infrared signal into a signal suitable for transmission. Receivers must be located in the room you wish to use the remote control. The wire from the receiver to the connecting block needs at least three available conductors and can be several hundred feet long. Cat5/Cat6 wire work fine.


This is simply a place for all the parts to plug in or connect to. Connecting blocks are usually classified based on the number of ports. All connecting blocks can support many IR receivers wired in parallel. Connecting blocks are usually located near the equipment that is to be controlled, along with the power supply and emitters.

Infrared Emitters

IR Emitters generally "stick" onto the front of the device you want to control. You with need one emitter for each device. "Dual" emitters have two emitters and one plug, so they only take up one jack of the connecting block. All emitters come with long cords and double-stick tape.

Q: My remote is working sporadically, what could be the problem?

A: The most likely problem is you have a signal band IR target and your remote is a dual band remote. You will need to upgrade your current IR Target with a Dual Band Target.

Q: Why do I need a Plasma Proof Target?

A: Some plasma and LCD TVs emit broad-spectrum infrared noise. This can cause issues with transmitting the proper IR signals back to the hub.

Credit Cards