Choice Select Dual Band Plasma Proof IR Target

Part no. 47-600-011

47 KHz | 80 FT Indoors | 15-20 FT Outdoors | 6 FT Cable | Adhesive Backing

Quantity Discount Pricing
1-2 3-5 6-7 8-9 10+
$35.19 $33.49 $31.82 $30.14 $28.47
Quantity Discount Pricing
1 - 2 3 - 5 6 - 7 8 - 9 10+
$35.19 $33.49 $31.82 $30.14 $28.47

Choice Select Dual Band Plasma Proof Infrared Remote Target

The Choice Select Plasma-proof dual band IR Target acts as a remote receiver and control unit. This will work with all the latest systems from DISH, DirecTV, Charter and AT&T U-Verse. This target is shielded and will not be affected by signal radiation from a plasma TV. The dual band target can be connected to other IR targets in parallel. Includes an adhesive mounting tape and 6 ft. of cable.


  • Control range: 80 ft. indoors, 15-20 ft. in direct sunlight
  • Frequency: 47 KHz
  • Dimensions: .43in W x .39in D x 1.81in H
  • Includes 6 ft. cable
  • Adhesive backing
  • Unit may be connected to other IR targets in parallel
  • Note: If you find your remote working sporadically you may need a dual band target.
REVIEW SUMMARY for Choice Select Dual Band Plasma Proof IR Target
No reviews for this product

Q: What are the different parts of an IR System?

Infrared Target

This device picks up the infrared signal from your remote control just like a TV or VCR. It encodes the infrared signal into a signal suitable for transmission. Receivers must be located in the room you wish to use the remote control. The wire from the receiver to the connecting block needs at least three available conductors and can be several hundred feet long. Cat5/Cat6 wire work fine.


This is simply a place for all the parts to plug in or connect to. Connecting blocks are usually classified based on the number of ports. All connecting blocks can support many IR receivers wired in parallel. Connecting blocks are usually located near the equipment that is to be controlled, along with the power supply and emitters.

Infrared Emitters

IR Emitters generally "stick" onto the front of the device you want to control. You with need one emitter for each device. "Dual" emitters have two emitters and one plug, so they only take up one jack of the connecting block. All emitters come with long cords and double-stick tape.

Q: My remote is working sporadically, what could be the problem?

A: The most likely problem is you have a signal band IR target and your remote is a dual band remote. You will need to upgrade your current IR Target with a Dual Band Target.

Q: Why do I need a Plasma Proof Target?

A: Some plasma and LCD TVs emit broad-spectrum infrared noise. This can cause issues with transmitting the proper IR signals back to the hub.

Credit Cards