Desoldering Iron with Vacuum Bulb - 60 Watt

Desoldering Iron with Vacuum Bulb - 60 Watt

Part no. 93-100-712

60 Watt | Vacuum Bulb | 2 Prong Plug | Vacuum Away Solder

 
(2 reviews)
Quantity Discount Pricing
1-2 3-5 6-7 8-9 10+
$14.69 $13.99 $13.29 $12.59 $11.89
Quantity Discount Pricing
1 - 2 3 - 5 6 - 7 8 - 9 10+
$14.69 $13.99 $13.29 $12.59 $11.89
QTY  


Desoldering Iron with Vacuum Bulb - 60 Watt

The 60 Watt Desoldering Iron with Vacuum Bulb makes desoldering easy. Simply squeeze the vacuum blub and place the iron over the solder. When the solder has melted release the bulb and the solder is sucked into the bulb.

Features:

  • 60 Watt
  • Vacuum Bulb
  • 2 Prong Plug
REVIEW SUMMARY for Desoldering Iron with Vacuum Bulb - 60 Watt
 
3.0 (based on 2 reviews)
  • Desoldering iron with vacuum bulb 60 watt

    Reviewed by:

    From: Ohio

    12/13/2015    #19779

    PROS: The product works really well; Super fast
    CONS: None specified
    Used it to desolder some connections on back of a GM instrument panel... Worked great, left no solder behind to hang up....
  • bad part

    Reviewed by:

    From:

    7/14/2015    #17324

    PROS: The product works really well; Super fast
    CONS: None specified
    The solder remover broke after 2 tries
1

Q: When selecting a soldering Iron how many watts do I need?

A: Typically, soldering irons may have a power rating of between 15 to 30 watts. They are fine for most work. A higher wattage does not mean that the iron runs hotter, it simply means that there is more power in reserve for coping with larger joints. Consider a higher wattage iron simply as being more resilient when it comes to heavier-duty work, because it won't cool down so quickly.

Q: Is my new soldering iron ready to solder out of the box?

A: No. An important step to good soldering is tinning. Tinning should be done to new irons, replacement tips, and older iron tips. While the iron is warming up, hold the solder against the tip and wait until the solder begins melt. As soon as the solder begins to melt, coat the tip surface completely and wipe the tip off with a wet sponge. The end result should be a thin layer of solder coating the tip.


Credit Cards