3 Pin DIN Female Solder Connector - Plastic

Part no. 1735

3 Pins | Solder Cups | Plastic | Molded Strain Relief | 22 AWG Wire | 7mm Cable

(1 reviews)
Quantity Discount Pricing
1-4 5-9 10-49 50-99 100+
$1.23 $1.04 $0.96 $0.86 $0.76
Quantity Discount Pricing
1 - 4 5 - 9 10 - 49 50 - 99 100+
$1.23 $1.04 $0.96 $0.86 $0.76

The 3 Pin DIN Female Solder Connector is economic and lightweight. The jack comes in four parts and can be easily disassembled for access to the solder lugs. The 3 Pin DIN Female Connector accepts up to 22 AWG wire. The solder ci[s are easy to work with and the eyes are easy to thread. The 3 Pin DIN Female Connector is designed with molded strain relief and accepts cables up to 7mm.


  • 3 Pin DIN Female
  • Plastic
  • Lead Type: Solder Cups
  • Molded Strain Relief
  • Accepts 22 AWG Wire
  • Accepts Cable up to 7mm

Please Note:

  • Connector uses a 5 pin DIN housing, while only 3 conductors are present
  • Compatible with all 3 pin DIN male connectors
REVIEW SUMMARY for 3 Pin DIN Female Solder Connector - Plastic
2.0 (based on 1 reviews)
  • image the worst quality connector...

    Reviewed by:

    From: boston

    6/1/2013    #1285

    PROS: None specified
    CONS: None specified
    Now... open your eyes,...here it is. Extremely poor quality. a thin rubber-like plastic shield. Components feel like 25 cent vending machine toy.. It may work for my charger aplication, but i'm not going to risk it.

Q: What is the configuration for 3 pin din connectors?

A: See image below.

Q: What are 3 Pin DIN Connectors commonly used for?

A: The 3 Pin DIN Connector is commonly used for mixer power supplies and VESA Stereo applications.

Q: What cables are used with DIN Connectors?

A: Din connectors are commonly used with multi-conductor cables with at least one conductor per pin on the connector.

Q: How do I attach a DIN connector to my cable?

A: In order to attach a DIN connector to a cable you must solder each pin to its respective conductor.

Q: How do I prevent melting the plastic in the connector during soldering?

A: When soldering a DIN connector avoid heating the untinned wire and connector point and applying the solder all at once. This will cause melting and frustration. Tinning the wire ends and allowing them to cool before you tin the connector will prevent melting and allow you to attatch the wire correctly.

Pin Configuration Diagram

Credit Cards