Belden 734D1 DS3/4 Single Coax Cable - 20 AWG - Per FT

Belden 734D1 DS3/4 Single Coax Cable - 20 AWG - Per FT

Part no. 80-734-910 BK

75 Ohm | 20 AWG | Stranded Center Conductor | PVC Jacket | Shielded | UL Listed | For T3 & T4

Quantity Discount Pricing
1-49 50-499 500-749 750-999 1000+
$1.40 $0.95 $0.84 $0.73 $0.56
Quantity Discount Pricing
1 - 49 50 - 499 500 - 749 750 - 999 1000+
$1.40 $0.95 $0.84 $0.73 $0.56

The Belden 734D1 is a 75 ohm cable often used for telecom, telco and broadcast and other 75 ohm requirements. This UL listed cable has a 20 AWG PVC outer jacket. It contains a stranded silver plated copper covered steel center conductor with a polyethylene dielectric and braided shielding to protect against unwanted interference.


  • DS3/4 Cable
  • 75 Ohm
  • 20 AWG
  • Stranded center conductor
  • PVC Jacket
  • Braided shield
  • UL Listed
  • Sold per foot
  • Max Continuous Length: 1000 FT

Please note: All products that are bought per foot are non-returnable.

Any amount of cable you order above the maximum continuous length of 1000 FT will be sent in separate pieces.

REVIEW SUMMARY for Belden 734D1 DS3/4 Single Coax Cable - 20 AWG - Per FT
No reviews for this product

Q: What does AWG stand for?

A: AWG is the gauge size and denotes the thickness of the cable. The lower the gauge, the thicker the cable. AWG stands for "American Wire Gauge" and is a standardized wire gauge system used throughout the industry.

Q: What is mini coax used for?

A: Because of the size and flexibility, mini coax cable has many uses. Most commonly mini coax is used to make jumper cables and also used in RF applications and many video applications.

Q: What does the jacket rating CL2, CM and CMP mean?

  • CL2 is the standard type of PVC jacket used for low voltage cable. CL2 rated cables are often referred to as in-wall rated cables and can be run almost anywhere except plenums. CL2 is more common for non-professional use.
  • CM is standard communications cabling that is not run in walls or in plenum air spaces.
  • CMP is a rating that is given to cables that have passed a stringent burn test and are able to be run through plenum air spaces. Plenum air spaces include drop ceilings and non-ducted HVAC air returns.

Q: What does “RG” mean?

A: The "RG" is short for "Radio Guide," a term that dates back to the World War II era, when the military made heavy use of coaxial cable, and developed a set of standards to specify different grades of coax and their applications. Even though we still refer to coaxial cables by their original RG numbers today, these standards are now obsolete in regard to actual military use.

Q: What is the difference between 50 and 75 Ohm Cables?

A: 50 and 75 Ohm values refer to the impedance of the coaxial cable. Impedance is a measure of resistance, in the cable, to the flow of electrical energy. There really is no “good” or “bad” impedance, just the right impedance for your application. For 75 Ohm cable, the primary application is the transmission of a video signal. In the case of 50 Ohm cable, it is a data signal that is for the most part being transmitted.

Credit Cards