Cat5e Patch Panel

Cat5e Patch Panel

P/N:  PP5EXX

Features 110 terminations for easy and trouble free installations and mounting. These panels have been extensively tested in the laboratory, and in the field. Fully compatible with Gigabit Ethernet Meets FCC subpart 68 requirements Jack contacts, phosphor Bronze alloy with a minimum 50 microinch gold plating over nickel Insertion life -- 750 cycles minimum UL listed Enhanced PC designed technology provides reliable performance 24-Port 1.75 in. High X 19'' Wide (1 Rack Space) 48-Port 3.5 in. High X 19'' Wide (2 Rack Spaces) 96-Port 7in. High X 19in. Wide (4 Rack Spaces) Scroll Down for Hinged Wall Bracket

UNICOM Series 2000 Cat5e Patch Panel

P/N:  PATUE-180100

Designed to meet and exceed the standards in accordance with TIA/EIA 568-A. Each panel includes a wiring label insert for 568A or 568B wiring. The 110-type termination provides a reliable connection as well as the performance requirement for high-speed applications. Panels are 19'''' horizontal rack mount compatible offering excellent high-density. They are available in 24, 48 and 96-port configurations with built-in anchoring points. In addition to enhanced performance, optional color designation strips are available for easy administration. Series2000 Our UNICOM 2000 incorporates the most popular wiring configuration for 110-type connectivity. The 4-pair 110 type terminations are located on the top or bottom of each RJ-45 Jack.

 

NaviLite LED Cat5e Patch Panel

P/N:  PP5ELED

Available in 24 or 48 Port.  Signal Transmitter is sold seperately Revolutionary cable identification solution for the future Show Me Cables newly designed Light Cable Identification Technology (LCI) is embedded as a regular patch panel.  Allows LED to be built into any panel to help installers quickly accurately locate cable connectors to workstations. Guess work caused by hard-to-hear tones is a thing of the past. Finding the right cable for adjustment, is as easy as turning on a light. Features: Meets the TIA/EIA-568-B.2 / 568B.2-1 Cat.5e, ISO/IEC 11801 and EN 50173-1 specification. Support T568A & B wiring and easy installation. Writable and re-writable marking surfaces for each port on the front panel. Dual IDC connector can accept 22-26 AWG solid and stranded cables. Terminate with 110 or Krone tool and standard EIA 19'''' width. LCI (Lighting Cable Identification) Technology for saving cost and time on cable identification job. Two LED statuses (Steady/ Flashing) selectable for allowing two teams to work at the same time. Two LED statuses (Green/Red) for identifying on-line or off-line. (Connected to switch or not) Applications: 10/100/1000Bas-T/Tx Ethernet/ Fast Ethernet/ Gigabit Ethernet. Analog and digital Voice.

12-Port 110-Style Vertical Cat5e Patch Panel

P/N:   PP5E12

with 89D Mounting Bracket Features 110 terminations for easy and trouble free installations and mounting. These panels have been extensively tested in the laboratory, and in the field. Perfect for small office or home network Can be wired 568 A or B MSRP-$31.75 - Show Me Cables - $23.99 - Save 35%

48 Port Cat5e Angled Patch Panel

P/N:  DPA485E88TGY

 • Exceed ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D standards
• Meet requirements of IEEE 802.3at for PoE Plus
• Each port is 100% tested to ensure NEXT and RL performance and is individually serialized to support traceability
• Utilize 110 termination on back panel and includes retention cap for each port
• Each port contains a universal label that is color-coded for T568A and T568B wiring schemes
• Contacts plated with 50 microinches of gold for superior performance
• Angled versions allow for higher density installations by easily routing the patch cords to each side of the panel eliminating the need for horizontal cable management
•Terminate 4 pair, 22 - 26 AWG, 100 ohm, solid or stranded twisted pair cable
• Mount to standard EIA 19" rack or 23" racks with optional extender bracket
• Write-on areas for port and panel identification
• Can be clearly identified with labels and icons
• Optional label kits (DPLK24 and DPLK48) contain adhesive label holder and labels for easy port and panel identification
• RoHS Compliant

Clearance Wall Mount Bracket - 2 Space

P/N:  GBN-WMB

Clearance! Special on 2 RU Mounting Brackets

List Price $19.99. Sale Price $11.99. Limited time offer.

This wall mount bracket is designed to mount patch panels or other 19 inch rack equipment.

Hinged Wall Mounting Bracket

P/N:  WHB-XX

Hinged Wall Mounting Bracket This sturdy metal mounting bracket is designed to mount patch panels or other 19' items on a wall.  1 RMS – 19 in. W x 1.75 in. H x 6 in. D – Typical 24 Port Patch Panel 2 RMS – 19 in. W x 3.5 in. H x 6 in. D – Typical 48 Port Patch Panel 3 RMS – 19 in. W x 5.25 in. H x 6 in. D 4 RMS – 19 in. W x 7 in. H x 6 in. D 6 RMS – 19 in. W x 10.5 in. H x 6 in. D   All Brackets have a 6 Inch Depth   Design with rear openings and hinged tabs for easy cable access.