Cat6 Patch Panels

Cat6 Patch Panel

P/N:  PP6EXX

Features 110 terminations for easy and trouble free installations and mounting. These panels have been extensively tested in the laboratory, and in the field. Fully compatible with Gigabit Ethernet Meets FCC subpart 68 requirements Jack contacts, phosphor Bronze alloy with a minimum 50 microinch gold plating over nickel Insertion life -- 750 cycles minimum UL listed Enhanced PC designed technology provides reliable performance 24-Port 1.75 in. High X 19'' Wide (1 Rack Space) 48-Port 3.5 in. High X 19'' Wide (2 Rack Spaces) 96-Port 7in. High X 19in. Wide (4 Rack Spaces)       Scroll Down for Hinged Wall Bracket

 

12-Port Vertical Cat. 6 110 Style Patch Panel

P/N:  PP612

with 89D Mounting Bracket This Cat.6 patch panels feature ''110'' terminations for easy and trouble free installations and mounting. These patch panels have been extensively tested in the laboratory, and in the field. Perfect for small office or home network Can be wired 568 A or B

NaviLite LED Cat 6 Patch Panels

P/N:  PP6ELED

Available in 24 or 48 Port.  Signal Transmitter is sold seperately Revolutionary cable identification solution for the future Show Me Cables newly designed Light Cable Identification Technology (LCI) is embedded as a regular patch panel.  Allows LED to be built into any patch panel to help installers quickly accurately locate cable connectors to workstations. Guess work caused by hard-to-hear tones is a thing of the past. Finding the right cable for adjustment, is as easy as turning on a light. Features: Meets the TIA/EIA-568-B.2 / 568B.2-1 Cat.6, ISO/IEC 11801 and EN 50173-1 specification. Support T568A & B wiring and easy installation. Writable and re-writable marking surfaces for each port on the front panel. Dual IDC connector can accept 22-26 AWG solid and stranded cables. Terminate with 110 or Krone tool and standard EIA 19'' width. LCI (Lighting Cable Identification) Technology for saving cost and time on cable identification job. Two LED statuses (Steady/ Flashing) selectable for allowing two teams to work at the same time. Two LED statuses (Green/Red) for identifying on-line or off-line. (Connected to switch or not) Applications: 10/100/1000Bas-T/Tx Ethernet/ Fast Ethernet/ Gigabit Ethernet. Analog and digital Voice.

Hinged Wall Mounting Bracket

P/N:  WHB-XX

Hinged Wall Mounting Bracket This sturdy metal mounting bracket is designed to mount patch panels or other 19' items on a wall.  1 RMS – 19 in. W x 1.75 in. H x 6 in. D – Typical 24 Port Patch Panel 2 RMS – 19 in. W x 3.5 in. H x 6 in. D – Typical 48 Port Patch Panel 3 RMS – 19 in. W x 5.25 in. H x 6 in. D 4 RMS – 19 in. W x 7 in. H x 6 in. D 6 RMS – 19 in. W x 10.5 in. H x 6 in. D   All Brackets have a 6 Inch Depth   Design with rear openings and hinged tabs for easy cable access.